BAND-IT 080-CP1099 2-1/2X5/8 GALV CS CENTER PUNCH CLAMP

2-1/2X5/8 GALV CS CENTER PUNCH CLAMP

BAND-IT 080-CP1099 2-1/2X5/8 GALV CS CENTER PUNCH CLAMP.- Standard clamps are offered in a variety of sizes and styles.

A must have for any shop! The BAND-IT 080-CP1099 2-1/2X5/8 GALV CS CENTER PUNCH CLAMP is ideal for all kinds of light work, such as occasional use during machine set-up or repairs. The precision machined anvils are accurately ground and the spring steel core is protected by a seamless hexagon housing. This heavy wall clamp features hardened jaws with spiral spring thrust pads to reduce marking on the work piece, along with a slotted adjustment pin and a solid round adjustment knob. This quality constructed clamp has Teflon lined

BAND-IT 080-CP1099 2-1/2X5/8 GALV CS CENTER PUNCH CLAMP The BAND-IT 080-CP1099 2 1/2” x 5/8” Galv CS Center Punch Clamp features two striking faces arranged to give a rapid and clean cut with minimal chatter where it is most needed. $37.31 $41.49 $70.63

Ideal for industrial and commercial use, BAND-IT CP1099 2 1/2X5/8 Galv. CS Center Punch Clamp has cast iron construction with zinc-plated body. Their flat ends offer a greater surface area for force distribution and alignment and the heavy-duty, steel band mounts to any flat surface.

Band-it's 2 -1/2 inches x 5/8 inch center punch clamp features a steel wire frame for added strength. The strong spring action and jaws clamp any 1-5/8 to 2 inch tubing with the highest holding power. A built in closing feature securely locks your work piece in place while grinding and provides the convenience of being able to adjust its length to create varying angles.

The BAND-IT CP1099 is a professional quality 2-1/2?x5/8? Carbon Steel C-Clamp. It features a replaceable screw that enhances the lifespan of the clamp. Made in the USA, it can be used with woodworking, metalworking and fabricating applications.

Designed for use with racking systems, this band-it center punch clamp makes it easy to secure two lengths of pipe, tubing or channel to an existing structure. The U-bolt design allows this clamp to be installed at virtually any angle and the 1.5" wide base provides solid support. A hex-shaped bolt heads allow for functional tightening.