Bard HVAC EHWA02-A05B 5KW Heat Kit (Equipment)

5KW Heat Kit (Equipment)

Get ready for the cold and the heat with our Bard HVAC EHWA02-A05B 5KW Heat Kit (Equipment). This heating equipment features a 5.0 kW inverter that helps provide larger spaces with consistent, quiet heat. It only uses 208 amps, so it is easy to connect this unit without compromising your existing electrical panel. This heating equipment comes complete with a DS250 controller and has a 2/1 power supply connection. Install this heating equipment in your work shop or garage for even heat distribution when you need it the most.

The Bard HVAC EHWA02-A05B 5KW Heat Kit (Equipment) consists of one heat kit unit, which produces clean, dry, heating steam by burning diesel fuel. This heating system is able to produce approximately 5kw of heating steam per hour, at a maximum pressure of 8 bar, and with a flow rate of 0.3 l/min.

Bard HVAC EHWA02-A05B 5KW Heat Kit (Equipment)

The Bard HVAC EHWA02-A05B 5KW Heat Kit (Equipment) is a replaceable heat kit used in both residential and commercial heating/cooling systems. The hardened, fiberglass element is protected by an all-weather polyurethane jacket, providing the maximum amount of heat output with the lifespan to match. Works with systems that have a forced air water heating system.

The BARD HVAC EHWA02-A05B 5KW Heat Kit consists of one one-piece evaporator, two lower Oasis® heat exchangers, and two 5kW electronic vertical dual modulating PID controllers. The BARD HVAC EHWA02-A05B 5KW Heat Kit is used to implant the GasPak surface condensing system. GasPak consists of a collection of components that are assembled to create a modular direct water heating system for treating groundwater at facilities or operations where an electric power source is not available, prohibited, or considered too costly.

The Bard HVAC EHWA02-A05B 5KW Heat Kit is ideal for keeping the temperature between 68°F and 96°F in small buildings, at job sites, or garages. The kit includes an AHPA K0.2 aluminum fin coil, 50'L x 3/8" diameter copper line and a BX series condensing unit. This kit requires one air handler and one fan motor.

The Bard 5 kW Heat Kit is a complete system designed for heating and/or installation of emergency generators in an emergency such as natural disaster situations. The system includes the AHWA03-A05B Air Handler, which is ideal for high ambient temperature areas or where electricity accessibility is limited without the need for power. The heating element is made of 16 gauge carbon steel and has aluminum fins with a double winding design which allows for higher efficiency and heat output.