Belimo B213B+TR24-3-T | US | CCV | 0.5" | 2 Way | 4.7 Cv | w/ Non-Spg | 24V | Floating

"1/2"" 2w 4.7cv 24v OnOffFlt NSR"

Belimo B213B+TR24-3-T | US | CCV | 0.5" | 2 Way | 4.7 Cv | w/ Non-Spg | 24V | Floating

This 2-way valve is used in a variety of residential and commercial applications, such as gas furnaces, water heaters, boilers, pressure boosting systems and more. This valve contains a main housing filled with non-solidifying fluids that facilitate the passage of fluids through it. The housing contains a floating pilot mechanism and a spacer to regulate openings to the working device. The nominal pressure ratings between 2-way valves and 3-way valves are similar enough that 4.7cm2 2-ways can replace smaller 3-way valves (within reason).

The B213 is a fully compatible two way solenoid valve designed for use in a wide range of industrial applications. This robust 4.7 CV unit will provide years of dependable operation for many industries such as: Cold Storage, Ag and Dairy, Food and Beverage, General Manufacturing, Chemical and Petrochemical and Waste Handling.

This New 24VAC Valve (B213B) features an isolated pilot in a NEMA 4X plastic enclosure. This valve also features B+ terminals located on the end of the spool. The 24VAC pilot is capable of Fire Protection Flows up to 4.7GPM in a 2-way system with a non-spill position.

The Tri-Star 2 Way Control Valve seamlessly integrates with Belimo's line of Valves. The B213B+TR24-3-T, with 1/2" NPT connections, offers an instant hot water output and a temperature rise only when there is a demand for hot water. This valve features the Floating Solenoid (FS) feature, which gives added protection against freeze damage.

The two-way solenoid valve is based on the latest electronic microprocessor technology. It is designed to provide accurate pressure control during heating or cooling of a refrigerant circuit without flow interruption.

The Belimo B213B+TR24-3-T is a Cv (constant volume) valve with standardized dimensions and mountings, designed for installation in the piping network in modern HVAC installations consisting of central, split or VRF systems. The valve has a single port for gas flow and an internal rubber diaphragm for 2-way operation.