Belimo B239+AFRB24-SR | | CCV | 1.5" | 2 Way | 29 Cv | w/ Spg Rtn | 24V | 2-10V

"1 1/2"" 2w SS 29Cv 24V S/R PROP"

The 2 way, 1 1/2" 2W 29Cv 24V S/R PROP. can be used for Heating, Cooling and Reverse Heat Pump applications. A Built-in EFB adjusts the Pressure Relief Valve during startup to prevent thermodynamic surges from damaging the compressor and the unit operates with a high pressure protection switch which automatically disables the circuit if it exceeds the preset factory set value.

Belimo B239+AFRB24-SR | PROP 2W SS 1.5" 29Cv 24V S/R; 24V; 3-10V PROP.

This valve conveniently regulates water flow and pressures to your tub or shower system, allowing you to save energy. The model number is B239+AFRB24-SR | | CCV | 1.5" | 2 Way | 29 Cv | w/ Spg Rtn | 24V | 2-10V, part of our shower and bath valves product line. It is used on balanced spindle systems, as part of a series that has a Cv (flow coefficient) of 29.00, a standard pipe size of 1 1/2'' in diameter and a temperature range of 25 - 140 degrees

The Belimo B239+AFRB24-SR is a 1 1/2" 2-way solenoid valve that outputs 29 Cv with a 24 VDC coil. This device has 24 VDC supply voltage, 28 VDC operating voltage and a 2-10 VDC control signal input. It has a straight connecting section and a spade terminal inlet connector.

The B239+AFRB24-SR is a 2 valve, single pipe, 24V motorized proportional controller with a 1.5" branch designed to control modulating air valves and devices. It has constant voltage, strobofast/ramp/peak & cycle/selectable speed working modes as well as a two-way selector switch. The controller has fixed on/off control mode. The motor speed is adjusted by the range of voltage supplied.

The B239+AFRB24-SR 2 Way 4 Port Solenoid Valve operates on DC power, allowing for convenient integration into a variety of control applications. This model comes with 2 NEMA 10 connectors and includes a 2"" Spigot Reducing Bushing.

The Belimo B239+AFRB24-SR 24 V 2-10V 2 way solenoid valve is typically used for supply line applications in commercial, industrial and marine applications requiring automatic operation and quick response time. The directional control valve consists of a stainless steel mechanical spool, central shaft, check ball, coil valve seat and plug with sealing lips. The main body's construction is of corrosion resistant plastic material with nylon mechanical seal ring and O-ring seal.

The B239+AFRB24-SR offers two-way valve capability with pilot operated service regulator, which offers an adjustable proportional control of the valve discharge pressure. Easy to apply, the valves are intended for use in the cooling and heating cycle on refrigeration equipment. Their compact design allows for convenient mounting of the valves.

The B239+AFRB24-SR is designed to satisfy the specific needs of HVACR/R and refrigeration & air handling professionals by providing an accurate, dependable control valve with a wide range of configurations available. These valves can be specified as 1-way, 2-way and pilot operated. In addition, a stainless steel pilot line is standard in place of the more costly and restrictive bronze model typically found on other comparable products.