BELIMO
BELIMO LF24-S LF24-S US Spr.Rtn.Act 24V 35 in-lb (4Nm)On
/Off Switch The Belimo LF24-S LF24-S US Spr,Rtn,Act 24V 35 in-lb (4Nm)On/Off Switch is a 24VDC, 35 in-lb (4Nm) On/Off switch.
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account24v Prop SR 35inlb 10kOhmTherm
The Belimo LF24-ECON-R10 24v Prop SR 35inlb 10kOhmTherm is a Damp Actuator.
Set the damping rate to your desired level with our Econor R10 Modulating 24V damper actuator. Designed for high-end applications requiring low power consumption, this actuator can modulate up to 350 times per second. Running on a 24V DC supply, it should be controlled using a 24V AC signal. This particular damper actuator is 35in/lb and operates at 10kOhm.
The Belimo LF24-ECON-R10 is a damper actuator for High Mount with 10KOhm resistance and 35 inch-lb force.
LF24-ECON-R10 | 24VDC | 10K Ohm Thermostat Damper Actuator
PerfectType 24V SL8-Nc - 5A Actuator
When the temperature or airflow is adjusted by a user, the damper actuator will control the dampers to reach the target value. This is done with help of an embedded PID algorithm in the controller that uses measured local air temperature and global airflow to create the ideal thermal comfort when both parameters are at equilibrium. To be installed in volumes above 100m3.
The GRATED FRAME FLO-TEC family of control valves are designed to satisfy any of your pumped hot water requirements. Control is achieved through the use of a pressure potentiometer. Three models are available, each with different characteristics: