BLUE SEA SYSTEMS BS-2128 MaxiBus, 2 x 5/16 Studs, 6 x #10 Screws

MaxiBus, MFG# 2128, with 2 x 5/16 Studs and 6 x #10-24 Screws. 250 Amps.

The BLUE SEA SYSTEMS BS-2128 MaxiBus, 2 x 5/16 Studs, 6 x #10 Screws is specifically designed for your boat. The BLUE SEA SYSTEMS BS-2128 MaxiBus is made of the highest quality and will ship to you in brand new condition.

MaxiBus a rugged a fully welded flat-floating buss bar specifically designed for use with Blue Sea Systems battery combiner products. MaxiBus is constructed from heavy duty marine grade 5052 aluminum and features advanced technology, high amperage circuit tracing, and a rugged powder coated finish. This buss bar is intended for use with BBX-2 & BBX-4 battery combiners. MaxiBuses are available in 20 foot lengths with various bus strip configurations for wiring 12V DC solar panels together in series, or wiring DC source to DC loads such as lights, pumps, and relays

With a MaxiBus power distribution panel you can easily arrange for moving heavy-duty AC loads in vehicles, RVs, boats, or recreational vehicles. Switching AC power sources is easy with the slide switches.

The MaxiBus is the ultimate in both performance and quality. The system is designed to provide optimum output in a multi-faceted power distribution system. From having the ability to power multiple amplifiers with the exceptional current delivery, to being able to supply current hungry devices such as HID kits, the MaxiBus has you covered. With an infinitely variable voltage limiter, you ensure that your equipment receives stable power while maintaining optimal performance.

MaxiBUS™ stud mounting is quicker, easier and stronger than ever! Maximize your panel space by combining up to eight (8) circuits on each panel. Connections are easily made in parallel off one stud with integral terminal blocks.

MaxiBus is a heavy-duty battery isolator, designed to work with both 12 volt and 24 volt systems. It

The Blue Sea Systems MaxiBus is a high-performance busbar system that provides safe, efficient power distribution on any boat with generous clearance between critical controls and bus boundaries. The bus intersections have been pre-measured to maximum efficiency, so it's easy to select the correct size maxibus for any installation. And it can't be beat for safety: a triple-sealed, leak-tight design protects against corrosion and shorts.

The Maxibus® is a complete modular busbar system manufactured from high-quality aluminum alloy. It includes mounting clamps, busbars, switchboards and heat sink panels, which are all designed for high-voltage electrical equipment on boats or powerboats that draw more than 28 amperes. This maximizes current carrying capacity while minimizing power losses due to ampere-turns in the cabling.

MAXI-BUS™ modules are specifically configured for Blue Sea Systems multi-function switchgear. Tough Stainless Steel connectors and hardware that works with the latest generation of marine electronic equipment.

Designed to be mounted onto an 1/8" or 3/16" thick steel plate. The 2128 is Blue Sea Systems smallest dual busbar system, intended to work with both 24 and 28-Series battery switches. The 2128 will work with our 2220, 4-Circuit Protector Plate, 2222, 4-Circuit Dual Battery Kit with Switches or any other product in the 2621 series of engineering hardware.The dual busbar design provides a safe platform for higher current applications and multiple accessories. Each output is protected by a fuse with a 15A circuit breaker.

High quality bus bar that is great for connecting anything that takes power! This can be used to connect your battery bank together, or just to connect up some solar panels.

This left side aluminium bus bar is suitable for use in marine and industrial applications such as fire and bilge pump control panels, house and generator power distribution panels, or any application which uses bus bars.