BLUE SEA SYSTEMS661-8081 PANEL DC 5 POS VOLT/AMMETER

PANEL DC 5 POS VOLT/AMMETER

The BLUE SEA SYSTEMS 661-8081 Panel DC 5 Pos Volt/Ammeter is designed for use on 12 volt marine systems. It includes one 10 amp ammeter, three 8 gauge terminal blocks, and one 20 amp volt meter with degree hour totalizer in one removable panel.

The Blue Sea Systems 661-8081 Panel DC 5 Position Volt/Ammeter enables 5 circuit volt and ammeter readings in one compact system. This meter is differential input as well has an adjustable output to match the analog volt gauge on your panel. The meter can display the values of all the systems at once or individually, and the two ranges, 25-100, and 0-5 volts can be set independently.

Panel DC 5 Position Voltmeter/Ammeter.

The new 661-8081 Blue Sea Systems Panel DC 5-Port Volt/Ammeter measures only 1-1/8 inches thick and fits virtually anywhere. The 661-8081 uses state of the art digital technology to maximize accuracy, avoid false trips caused by transient voltages such as electrostatic discharges. It has a momentary pushbutton power disconnect (MDCC) to disconnect power in an emergency situation, as well as a reset button for easy self-testing.

The Blue Sea Systems 661-8081 Panel DC 5-position voltmeter is an electronic display device that monitors voltage. It is used to display battery voltage, shunt voltage or DC system voltage. The precise and accurate design ensures the lowest current drain. This unit features a bright yellow face for improved visibility in both daylight and low light conditions. The easy-to-read large numbers on the dial combined with a digital readout make it simple to keep track of your systems energy usage, even during multi-day trips.

The 661-8081B Blue Sea Systems Panel DC 5 is a marine panel rated for 12V and can handle 4 Amps of constant current. It has screw terminals that accept up to 14 gauge wire. The panel is waterproof and boasts a rugged steel housing with a bright white finish. The 661-8081B includes an illuminated DC voltmeter, ammeter, battery switch, five fused accessory circuits, four DC circuit breakers, six pairs of screw terminals that accept up to 10 AWG wire as well as grommets for mounting in a standard size hole.

Blue Sea systems 661-8081 panel provides current, voltage and ammeter functions in a single compact module. This 8-position, 5-function meter lets you monitor a combination of electrical load conditions simultaneously. The meter's accuracy and precision are suitable for critical DC applications. With each application, any one of the five displays can be activated individually, or all five displays can be activated in sequence for a full cycle of display results.