BLUE & WHITE F-30250P FLOWMTR 2-1/2 IPS 60–240 GPM

FLOWMTR 2-1/2 IPS 60–240 GPM

This BLUE & WHITE F-30250P FLOWMTR 2-1/2 IPS 60–240 GPM is a very reliable tool for consumer. Many homeowners look at this item as the best tool because it is powerful. When you use this you will have a chance to clean out the clogs in your bathroom or in your place without spending a lot of time or effort. It will be a very functional tool when you want to drain a blocked sink. It has been used more than once by many consumers and they are very satisfied with this product that is why this is highly recommended already to your consideration.

The BLUE & WHITE F-30250P FLOWMTR 2-1/2 IPS 60–240 GPM pump provides a powerful high pressure output, ranging from 60 to 240 GPM with its 2.5 in. outlet and includes nozzle spray patterns that offer superior paint removal capability.

The Blue & White F-30250P Flowmeter is a 2-1/2" IPS 60–240 gpm metering pump designed for a wide range of water applications. Each Flowmeter turns up to 2,400,000 gallons of water per hour and features an automated electronic drain, solenoid valve, and pressure regulator.

The FLOWMTR Series flow meter is available as a single, 2–1/2 inch (64 mm) or 3-inch (76.2 mm) inlet version, and is capable of measuring up to 240 gpm (946 lpm). It provides direct analog output through a 4–20 mA signal, field adjustable revolution per minute (RPM) motor speed input for drive control, automatic calibration from 0.00 to 20 gpm (0.05 to 71.5 lpm), and cannot be limited by pressure or temperature conditions.

FloodMaster 2–1/2 IPS delivers 60 to 240 GPM at 2.0 to 30 PSI typically used for removing sand and rinsing concrete, asphalt and dirt from vertical surfaces. The FlowMaster, patented delivery system uses a positive displacement pump with a high-torque spline shaft supported by a heavy-duty mechanical seal, designed to handle abrasive jobs.

The Blue & White F-30250P Flowmeter provides advanced flow control for residential, industrial, and commercial applications. The meter measures 60–240 gallons per minute (GPM) with a maximum pressure of 125 PSI (8.6 bar) and accurate measurements to within 2% at all flow rates.

The FlowMeter measures two-and-one-half inch (64 mm) pipe size and is made of durable plastic for long life. It has a stainless steel outlet hub, easy to read graduations, an accurate percentage scale, and fine tuning meter to allow for faster setting time.