RHEEM 51-102994-01 BLOWER MOTOR 1/2 HP 120/1/60 (1075 rpm/3 speed)

BLW MTR 1/2HP 120V 1P 1075RPM

The Rheem 51-102994-01 Blower Motor 1/2 HP 120V 1P 1075RPM can be used on a variety of heating products. The blower motor can be used on high/medium/low settings and is specific to heat pumps. The blower motor is kept in place by four screws. This blower motor may need to be replaced if the heater unit is extremely dirty, corroded or frozen.

Rheem Blower Motor 1/2 HP, 120V, 1 Phase, 60 Cycle, 1075 RPM. Used in various Rheem Heat Pump Air Conditioning Models

The RHEEM 51-102994-01 is a Blower Motor that features 1/2HP, Voltage 120V, 60Hz Single Phase, Max Amps.10A, RPM 1075, Application Description Fan coil air handler.

This Rheem blower motor has a SEER of 11.1. The Rheem blower motor is designed for baseboard and through-the-wall air conditioning equipment. The Rheem blower motor is not field convertible. This Rheem blower motor is a 1/2HP, 3-speed unit, 120V, cooling only, 1325RPM nominal speed of operation, 100% duty cycle on high speed, and has a SEER of 11.1 with a sound rating at 1 meter of 77dB(A). The Rheem blower motor features permanently lubricated

The RHEEM 51-102994-01 Blower Motor. This motor has a 3 speed and 5/8 diameter shaft.

RHEEM blower motors are among the most reliable in the industry. Should a problem develop, just replace the motor instead of the entire blower assembly. These replacement motors are for use with existing blower assemblies and can be installed by homeowners.

The Rheem 51-102994-01 blower motor is UL listed and CSA certified. Measures approximately 6 inches in diameter by 6 1/2 inches long.