Bogen PS60 Platinum Series 60W, 8-Ohm/25V/70V, 1-Channel, Class-D Amplifier

Bogen PS60 Platinum Series 60W, 8-Ohm/25V/70V, 1-Channel, Class-D Amplifier

The Bogen PS60 Platinum Series 60W, 8-Ohm/25V/70V, 1-Channel, Class-D Amplifier is a perfect match for the dbx RTA2 reader amplifier, dbx x2s combination, or dbx HDs subwoofer amplifier. This ultra-compact amp delivers 60 watts into 8 ohms, allowing you to create a system that is easy to set up and take down.

The Bogen PS60 Platinum Series 60W, 8-Ohm/25V/70V, 1-Channel, Class-D Amplifier is a music enthusiast's dream! This high fidelity stereo amplifier is designed to power a full range of loudspeakers with powers as big as 100W. With the Bogen PS60 you will be ready for any performance situation.

The Bogen PS60 Platinum Series 60W, 8-Ohm/25V/70V, 1-Channel, Class-D Amplifier; with protection; AC 120/230 AC Voltage; Signal to Noise Ratio (SNR): >90dB; Frequency Response: 10Hz 20kHz; THD + N: 0.05%; Damping Factor (X): >500; Power Output (RMS): 60W (1ohm); Power Output (Peak): 100W (1ohm); 2nd Order IMD: -66dB; S/N Ratio (X Wtd, ref. 1

8 ohm, 25V., 70V. Bridged output. Frequency response: 12Hz-50kHz +/- 1dB. Stereo distortion at rated power <1%. Stereo separation at 1 kHz: >40dB. Power supply: 12-48VDC dual operational (can be 24V or 48V). Power consumption: 200W (max.). Interface: 3 sets of binding posts; 2 sets of solder lugs; link input; link output; remote input; remote output; PTC out

The PS60 Platinum Series amplifier delivers 60 watts per channel into an 8 ohm load using only 18 amps of supply current! It also offers an ultra-low distortion of 0.008% from 20 to 20,000 Hz when driving a 50W speaker at 1% THD. It is housed in a compact, all-aluminum chassis with commercially rugged gray powder coat finish. Class D technology means low operating costs and high efficiency.

The new Bogen PS60 Platinum amplifier is the first amplifier available for small portable sound systems. It has three power levels, so you can use it with any loudspeaker. Featuring an ultra-lightweight case that helps increase efficiency, it offers full-range audio at high SPLs and accepts balanced XLR or unbalanced phone inputs.

Contains one channel line of the Mfd by Bogen. Power rating: 60 Watts. Damping factor: 2 Ohm Minimum impedance: 8 Ohms. Gain bandwidth: 3 Hz 20 kHz. Power supply: 90 ~ 230V AC, 50-60Hz, 70V and 25V models go to 150V DC, CW/CCW; Specifications for individual models listed at left; Full Metal Jacket (FJM) Chassis; Pigtail Model; Small size and light weight; Thermal protection on output; "S" suffix denotes high grade metal film resistors for this amplifier; All built on a single

PS60 is a one-channel high efficiency 70V/70V/25W digital power amplifier with balanced XLR plus RJ45 I/O connectors. The PS60 features variable gain, heavy duty protection circuitry, low distortion, high damping factor, variable 0dB to -70dB attenuator, multicore cable connectivity, variable output level control input and temperature compensated power supply for consistent performance.

Zamp is proud to announce a partnership with Bogen Communications, a manufacturer of world-class public address and sound reinforcement equipment. Each piece in the Platinum Series line embodies Bogen's legacy of producing high performance, reliable products designed for live applications. Bogen is known for its legendary loudspeakers, iconic mixer designs, and advancing technologies that can be found at many of the most prestigious events in the world. B For nearly a century they have maintained their passion for creating equipment that is built to last. From live performances to broadcast applications, from installed sound systems to home theater, the most important elements in selecting a

This high-output power amplifier delivers a massive 60W RMS of clean audio power and is compliant with the needs and demands of today's sound reinforcement and mobile systems. The PS60 employs state-of-the-art Class D technology and incorporates Gold plated XLR input/output connectors, along with aluminum heat sinks and a low profile chassis to deliver years of trouble-free audio output. Our patented flexible crossover design makes system setup easy. Musicians will appreciate the super-clean class D performance; they'll hear more honest sound from their instruments, amplifiers and speakers.

We've taken the same superior Class D amplifier technology found in our EXTREME series amplifiers, and offered it at less than half the price. These amps are made to be durable, with the same components used to make our power amps for commercial sound reinforcement systems. And they sound awesome.