JAGUAR TIMING CHAIN TENSIONER
These positions are: 1) normally closed, 2) normally open, 3) spring loaded diverter or 4) spring loaded check valve
It has different flow rates by adjusting the low side Connected to the Red and Black port
The OTC OTC-9500 3-Position/4-Way Manual Valve is a simple, cost effective and reliable alternative to automated systems
It can be used alone or with the OTC-9100 to produce a 4 to 1 ratio
Can be used in many different ways and is suitable for use with most other oxygen delivery systems
The valve features a built-in regulator to provide accurate and stable flow control, which can be set from zero milliliters per hour (mL/hr) to 100 mL/hr
The OTC-9500 is a manual, single-handed, three position/four-way valve
The OTC-9500 3-Position/4-Way Manual Valve is designed for use on an IV therapy infusion pump to control the flow rate of fluids into or out of a patient
Used in combination with the OTC-9100 it provides a 3 to 1 ratio of water to air flow
This valve can be used manually or motorized using an actuator
No matter what industry you are in, we have the OTC/industrial products you need to help your business run more efficiently
The OTC OTC-9500 valve allows the doctor to manually control flow rate, direction, and stopcock position by rotating the handle
The valve head incorporates a locking mechanism that locks the handle in place when actuated into one of the three positions: off, full on and half on
Two micromanometer ports are provided for measurement and monitoring of the infused fluid volume during administration
It is optimal for drug delivery and angiographic procedures that require both bolus and continuous infusion of contrast media, such as dual or split bolus imaging
The Med Corp OTC-9500 is a 3-Position/4-Way Valve that is used in hospitals and medical facilities
The OTC-9500 is a 3-position/4-way manual valve that provides the operator with control of flow and pressure
The smart design incorporates three positions and four methods to open or close the valve in any combination
It can be used in a variety of applications such as isolation valves, shutoff valves, and manifold block valves
From air compressors and pressure switches to medical dispensing equipment and tooling systems, Med Corp has what you need
The valve can also be opened by pulling up on the handle or punching down on the foot pedal
The body has an all metal construction and is powder coated for corrosion resistance and lasting durability
The OTC-9500 is a manual 3-position/4-way valve
This valve is best for applications such as anesthesia, ambulatory care and emergency care
It also has different pressures by adjusting the high side connected to Yellow and Blue port
The valve has a manual operation and the 3 positions include off, suction and vacuum
The valve can be used for pressure boosting, safety relief or venting applications
OTC-9500 is a 3-position/4-way manual valve
They are used in applications such as air sampling, air flow measurement, gas/fluid isolation / venting, and vacuum systems
The OTC-9500 Series Valves are designed to control the flow of gas or liquid through a tube with a single input port and multiple output ports
OTC-9500 3-Position/4-Way Manual Valve
The valve is actuated by pushing its handle up to close or down to open a port