Broan S89108000 Lens -Broan

Broan NuTone S89108000Broan NuTone Lens

Install HVAC and ventilation parts with the S89108000 lens from Broan NuTone. This lens has a cULus listing and is suitable for use in damp locations. It features stainless steel construction.

The S89108000 Lens is used for the following NuTone / Broan Fan models: Big DB1, Big DB2, Big DB3, Big DT, Big HP, Fan-Rite 300A Oscillating Wall Mount Fan, Fan-Rite 400A Wall Mount Fan (Large Speed), Fan-Rite 5412 Airfoil Deluxe Wall Mount Fan, R-302 Plenum Roof & Wall Vent Cowl, R-321 Roof & Wall Vent Cowl, R -430 Heavy Duty Roof & Wall Vent Grille Kit

The replacement lens for the NuTone/Broan series number 891081000, 89108100, 89108110, S89108000. This lens is made of clear acrylic and features measures 12 inches up by 11 inches down. The lens rests between a two-inch baffle located on either side of the light. A total of four baffles are used to disperse heat throughout the aperture to provide more even distribution of heat. Accidental breakage is common when mounting the lens after it is removed from a light that was originally installed before 1988. All models containing this lens must be replaced because they were

Easy to fit lens replacement for NuTone models S8910/69... This lens is not compatible with the S89104000

We sell replacement lens for Broan ventilation hoods below!

The Broan Lens is a lens that you place into the grill for projection of heat.

Install this lens into a 9 in. round ceiling duct while it's still attached to the motor housing. It provides light in the space below for better visibility. The lens is secured using the screws included with the duct and is compatible with most canister lights that have an 8 in. diameter or less.