"CIsheave6.5""Dia
"BELT USES A, B OR 5V BUSHHING
Split Taper Sheaves are designed to provide a minimum of 3/32" (2.5mm) shaft movement and allow for proper tensioning. They have a 1/4" (6.35mm) bore and use the B Bushing, unless noted otherwise. Will accept standard belts up to 5" wide and 2-1/2" pitch.
Fits all 2B sheaves. For use on A, B and 5V belts.
Browning split taper sheaves are designed for use in cable applications or to mount pulleys on shafts that are not concentric with the sheave. Split tapers also provide a mounting surface for brackets, foot-plates and other accessories. These sheaves come in a variety of bore sizes, metric sizes and inch sizes.
Browning 2B5V48 Split Taper Sheave, Cast Iron, 2 Groove, A, B or 5V Belt, Uses B Bushing Browning 2B5V48 Split Taper Sheave, Cast Iron, 2 Groove, A, B or 5V Belt. Uses B Bushing. Fits Kelsey/Turbine Belts. Browning's Full Line is what you should trust when the work calls for a quality product at an affordable price. Whether it be for your tractor or skidsteer loader or for all of your construction equipment and vehicles.
2 groove sheave is designed for a 2 belt system and using a B bushing. It can be used in various applications. It was designed for use with standard ratios. The Browning 2B5V48 Split Taper Sheave, Cast Iron, 2 Groove, A, B or 5V Belt, Uses B Bushing is manufactured from steel and cast iron materials.
Browning-exclusive split-taper design for easy belt adjustment and increased strength. 2 Groove Sheaves are designed for 2" A, B and 5V belts. For 2" belts, use B Bushing #2548B with A Bushing #2548A. For 5V belts use 5V Bushing #2548B with 5V Bushing #2548A.
Browning 2B5V48 Split Taper Sheave, Cast Iron, 2 Groove, A, B or 5V Belt, Uses B Bushing
2 groove sheave, cast iron, 2 groove, A, B or 5V belt.
Our 2 Groove Sheave, Cast Iron, 2 Groove, A, B or 5V Belt, Uses B Bushing is used to support the "A" and "B" belts of a specific Browning machine.