Browning 2BK67H Bushed Classical Gripbelt Sheave, 4L or A, 5L or B Belt, 2 Grooves, Uses H Bushing

"2 GrooveSheave 6.45""dia C.I."

This Browning Bushing Sheave operates in pairs to drive belts up to 6"" wide. B.S.H. 6.45""Dia.C.I 1-1/8"" H Bushing (not included) attached to bottom of each sheave and swivel assembly (included). Use with any belt up to 2"? thick, A or B type belts, Tuffgrain® Custom Leathercraft No. 2G, or Veribelt® Flat Braid No. 2145 belt.'

Browning sheaves are designed to use a Browning belt. The 2 groove bushed sheave uses sheave bushings, and the 6.45"" diameter sheave has two grooves.

This sheave is an alternative to the one shown in the diagram. It includes two grooves (A and B) for belts up to 5/8" wide. Guard bearing prevents belt from moving backwards. Belt guide has a smooth surface and fits any 4L or A, 5L or B belt with flat sides used in H Bushing. The sheave has a tube diameter of 6.45 inches (16 cm).

Save your belt when it gives up. A lost belt can cost you time and money. Replace it with one of the high quality belts from Browning. Fits 36"" belt. Bushed Construction for uses where a smooth sheave is desired or where machine motion is limited to about 180 deg.. 2BK67H Bushed Classical Grip Belt Sheave, 4L or A, 5L or B Belt, 2 Grooves, Uses H Bushing:

The Browning 2BK67H bushed classical grip-belt sheave is hunter orange, has a 5/8"" diameter, is 4L or A belt, and 5L or B belt with 2 grooves. This bushed classical grip-belt sheave uses a H bushing.

Browning 2BK67H Bushed Classical Gripbelt Sheave, 4L or A, 5L or B Belt, 2 Grooves, Uses H Bushing

This vintage style sheave is constructed of cast aluminum, with a dark nickel finish and anodized bushed bronze H bushings.  (4) 1/4" diameter,.063" thick bushings are installed in the sheave. The face width is 2" across and the sheave outside diameter is 6 3/4". A browning product tag is riveted to the spacer flange.