Browning 2VP42X7/8 Variable Pitch Sheave, 2 Groove, Finished Bore, Cast Iron Sheave, for 3L, 4L or A, 5L or B Section Belt

"2 GrooveSheave3.95""OD

Our 5-inch pitch cast iron variable pitch sheave is designed for use on 3L, 4L or A, 5L or B section, V-belt drives. Drive surface is TPI (Pitch: 3.95". Center distance: 0"). Straight flange (8""OD). Belt bearing press fit in sheave bore. Below are a few benefits from the features that have resulted in 1,500+ sales of this product:

The Browning 2VP42X7/8 Variable Pitch Sheave , 2 Groove, Finished Bore, Cast Iron Sheave, for 3L, 4L or A, 5L or B Section Belt is constructed with cast iron. This sheave is designed for belt size 3L, 4L or A, 5L or B section where the pitch is variable and it features two grooves.

The 2VP42X7/8 Variable Pitch Sheave, 2 Groove, Finished Bore, Cast Iron Sheave, for 3L, 4L or A Section Belt from Browning is designed with two grooves to accommodate different size belts and accommodate even wear.

Our Variable Pitch Sheave is designed for use with a tubular belt or a V-ribbed flat belt. This sheave can be used on an A or B yoke, and fits belts up to 7/8" wide.

The 2VP42X7/8 Variable Pitch Sheave, 2 Groove, Finished Bore, Cast Iron Sheave for 3L, 4L or A, 5L or B Section Belt is made of cast iron for durability and long-lasting use. The sheaves made by the Browning are simple to install and operate.

Browning Variable Pitch Sheaves are designed to transfer motion and power from a drive sheave to a smaller driven sheave. Variable pitch sheaves can be used for any size belt or chain. It is recommended that you use the same pitch for each mating sheave in drive and driven sheaves. When using one or more driven sheave, an additional redrive may be necessary to convert the high RPM lower speed of the drive sheave to the higher RPM required by the driven sheave. Units include 2 flanges, bolts, and keyseats for assembly. Screws are not included with this item."

The Browning variable pitch sheave fits 3L, 4L or A section belts, which include the popular 3L and 4L belt widths. The sheaves mounts directly to the pump shaft of the auxiliary pulleywork. The Browning Variable Pitch Sheave allows you to quickly change your running line tension without changing belts. This versatile sheave can be installed on either side of a nable to suit your operation.