Browning BK100H Bushed Classical Gripbelt Sheave, 4L or A, 5L or B Belt, 1 Groove, Uses H Bushing

FHP Sheave

Our Bushed Classical Gripbelt Sheave fits 4L or A, 5L or B belt and uses H Bushing

The Browning BK100H Bushed Classical Gripbelt Sheave, 4L or A, 5L or B Belt, 1 Groove, Uses H Bushing

The Browning BK100H Bushed Classical Gripbelt Sheave is 4L or A, 5L or B belt. It has a 1 groove and uses H bushing.

The Browning bushed sheaves are designed to save you time, energy and money. By automating the removal of rubber from the belt, these "Bushed" sheaves virtually eliminate belt squeal. They have a larger capacity for faster and easier re-winding so less time is spent replacing worn drive belts. The belts themselves can be more easily installed because their pitch diameter is not limited by inside diameter of housing. The pulleys can be installed on either side which gives you more flexibility in considering drive placement. Enough capacity for 5L or B size belt

The Browning BK100H Bushed Classical Grip Belt Sheave uses h bushing. This bush sheave is 5/8" wide, has a 1 groove, 4L or A belt, and uses h bushing. It weighs approximately 1.28 lbs.

This Browning manufacturing model BK100H sheave provides a single-direction belting system that operates with a belt length of 4-inches long by 5/8-inch wide and 1/4-inch thick. Produced with a corrosion resistant material, this unit meets ANSI/ASME standard B-85, Grade B specifications. The proper belt bushing should be used with this product. This sheave has an operating load capacity of 6,000 pounds.

This Browning bushed sheave is ideal for increasing the line capacity of your winch. It is constructed of cast iron and designed to allow the use of either a 4L or 5L belt while using a standard H-style bushing. Use this sheave to expand the capacity of your winch, so you can use it to handle heavier loads.