C2G 15192 7FT CAT5E SNAGLESS UNSHIELDED (UTP) ETHERNET NETWORK PATCH CABLE - GRAY

7FT CAT5E SNAGLESS UNSHIELDED (UTP) ETHERNET NETWORK PATCH CABLE - GRAY

The C2G 15192 7FT CAT5E SNAGLESS UNSHIELDED (UTP) ETHERNET NETWORK PATCH CABLE - GRAY is a general network cable used for the connection of networking hardware in local area networks (LANs). This type of cable is also referred to as UTP (Unshielded Twisted Pair). The transmission performance of the 7FT CAT5E SNAGLESS UNSHIELDED (UTP) ETHERNET NETWORK PATCH CABLE - GRAY usually meets the requirements when connected to desktop computers, workgroup switches and hubs. It can also connect

The Cables To Go 50288 10 Foot Snagless Unshielded (UTP) Ethernet Patch Cable - Gray is designed to connect your patch panels, routers, switches, media converters and other network components together. Each cable is constructed of 4 unshielded twisted pairs for performance and reliability.

This Snagless Unshielded (UTP) Cat5e Ethernet Patch Cable features cables that are ideal for the network installation and higher bandwidth requirements of 100-Megabit Ethernet. Ideal for connecting Hubs, Switches, Routers and other Ethernet network devices together, these cables are available in a wide variety of colors to easily color-code your network installation.

This C2G Snagless Unshielded (UTP) Ethernet Patch Cable has a resistor on the 568B pin in order to maintain compatibility with 10/100 Mbps Ethernet devices. The cable is ideal for use with 10/100/1000 Base-T, or Gigabit Ethernet networks and PCs.

The C2G 15192 is a Cat5e Snagless (UTP) Unshielded Twisted Pair (UTP) cable, designed to handle bandwidth-intensive applications. It has been tested to be 100% compliant with the performance requirement specified by the IEEE 802.3ab standard. Category 5e is the most commonly used cabling system running at 1000baseT, meaning that this cable will deliver it's full rated speed up to 328ft from your host. This design is may be used for internet, phone, and video/TV cable runs instead of using RG-6 or RG-59.

Sleek and flexible, this Snagless/ Molded C2G 7-foot Network Patch Cable in gray is a durable option for all of your Ethernet applications. Cables are available in a variety of colors to easily color-code your network installation.

This 7ft snagless cable conforms to the TIA/EIA-568-B standard. It is used to connect all 10/100 base Ethernet devices to Ethernet hubs, switches, and routers. Designed for high performance in a 'plenum-rated' jacket, this cable supports bandwidth intensive applications including 100BASE-TX Fast Ethernet, and Gigabit Ethernet. Each cable is 100% tested for insertion loss before you receive it.