C2G 2980 25FT RJ45 8P8C CROSSED/ROLLOVER MODULAR CABLE

25FT RJ45 8P8C CROSSED/ROLLOVER MODULAR CABLE

#100568 - 25FT RJ45 8P8C CROSSED/ROLLOVER MODULAR CABLE WITH RED CORD. INCLUDES RIGHT-ANGLE molded 8-Port hub, mounting screws, and installation instructions.

The C2G 2980 25FT RJ45 8P8C CROSSED/ROLLOVER MODULAR CABLE is available for purchase in increments of 5.

The C2G 2980 25FT RJ45 8P8C CROSSED/ROLLOVER MODULAR CABLE is a shielded modular plug to modular jack connector, with standard color coded wires (orange for wire 1, blue for wire 2, green for wire 3, brown for ground and yellow for shield). The modular plug at the end of the cable can be removed and a variety of modular jacks, plugs or connectors can be installed.

C2G 2980 25FT RJ45 8P8C CROSSED/ROLLOVER MODULAR CABLE

The C2G 2980 25ft RJ45 8P8C Crossed/Rollover Modular Cable is designed for use with connected equipment, such as computers, networking equipment, and voice- and data-communication equipment. The product meets the TIA/EIA 568A and ANSI/TIA/EIA 568B standards and supports 100 MHz operation. It has a terminated modular plug at each end and the cable itself is constructed of unshielded twisted pair wire in a four-pair configuration.

This 25 ft. RJ45 8P8C crossed/rollover cable has a molded strain relief and molded boots to protect the RJ45 connector, and it supports 10/100Base-T Ethernet connections. It works with 8 conductor and 4 conductor modular jacks.

This 25 ft. cross-over cable allows you to connect Ethernet enabled devices using the 8P8C RJ45 modular connectors. With a stranded conductor, this cable is specifically designed for all networking applications where regular cabling is not possible such as when working inside walls and transoms. It features molded PVC RJ45 plugs and is made of four pairs of 23 AWG conductors that are wrapped in an overall braid shield.