Honeywell 10515 , Inc. Purple Peeper Ultraviolet Flame Detector 8 ft leads NEMA 4 1 in NPT Mtg

120V FLAME SENSOR ULTRAVIOLET PURPLE PEEPER

The Honeywell 10515 Inc. Purple Peeper™ 120V flame sensor is offered in three types: 3-wire 120V only, 4-wire 120V/240V, and 4-wire 120V/240V w/ alarm contacts. The range of the ultra-violet purple beam of light is 8 feet (includes 2 ft of cable), and has a mounting magnet with drip-shield to protect from water or oil splash.

The Honeywell 10515 (U) Purple Peeper Ultraviolet Flame Detector 8 ft leads NEMA 4 1 in NPT Mtg is ideal for monitoring or detecting invisible ultraviolet emissions associated with incipient fires. Its features include Ultraviolet flame sensor, 8 ft leads NEMA 4 1 in NPT mount, UL classified detector, Class A and AB rated detector, Externally accessed test/operate buttons, UV Activating bulb.

The Honeywell 10515 120V Flame Detector is a single-pole UV flame detector that can be configured as a NEMA 4 or NEMA 1 style sensor. A purple peeper, it produces a unique red light that alerts users to dangerous fire conditions. It operates in one- or two-wire loop and one output mode without auxiliary power. This flame detector is for use on hazardous gas and vapor areas only and is not intended for use on combustible gases or liquids. The Honeywell 10515 Ultraviolet Flame Detector comes with two 8 ft leads terminated with female 6 pin connector that exit the box at 90

Purple Peeper® UV flame detectors are essential elements in a sound fire alarm system. Used as stand-alone or network units, these small, rugged sensors provide reliable detection of visible and invisible flame and intense heat.

Purple Peeper 120V flame detector is the same flame detector used in industry. Purple Peeper's low level voltage output, combined with its polarized relay function, provides a fast response time to flame and fire conditions. Polarity-sensitive alarm relay contacts are normally closed (NC) until activated by combustion products or flames. For applications where two separate sensors are required, an input transformer must be used to complete the circuit from each sensor to the controller. 8 ft leads NEMA 4 1 in NPT Mtg

The Honeywell 10515, Inc. Purple Peeper flame/heat detector is the most popular UV detector in use by fire departments, hotels, hospitals, nursing homes and other institutions today. This reliable relay-type heat detector can sense flames from both open and hidden sources, smoke, dust vapors or gases at ranges up to 1500 ft. It features a 10 ft coiled cord and has a PURPLE alarm LED that flashes when sensing a flame condition. Appropriate for new construction and replacement applications - no conversion kits or retrofits required. The higher temperature probe option is used when the application range goes up to about 300

The popular Flame Detector combines the detection of a flame (flameless) with the ability to detect a human body (heat). For gas or liquid fuel, when any flame is detected, an alarm sounds. The Flammable Liquid Sensor is sensitive to hydrocarbon liquids such as gasoline and diesel and methane gas. The Purple Peeper offers the same high reliability, durability and ease of use as our other flame detectors.