HONEYWELL C7915A1028 C7915A1028 Flame Sensor, Infrared (Lead Sulfid

Flame Sensor, Infrared (Lead Sulfid

The Flame Sensor, Infrared (Lead Sulfid variety is a vital sensor for maintaining heating, cooking or air conditioning processes. With so many choices today when shopping for an electronic part, it is good to know that original parts from Honeywell are the best choice.

HONEYWELL C7915A1028 C7915A1028 Flame Sensor, Infrared (Lead Sulfid ZnSO4 ) Lead Sulfide

The HONEYWELL C7915A1028 Flame Sensor, Infrared (Lead Sulfide TR) is a state-of-the-art device that helps reduce energy costs in residential and other buildings. It can also increase the safety of fires by detecting them even before they are seen by the human eye.

The Flame Detector (Lead Sulfimeter) is a fire sensor that emits an infrared beam across the gas flow. Any flame or obstruction in the path of the beam will reflect and modulate the frequency of the transmitted beam. The oscillator responds to this modulation and generates an audible alarm. This detector is effective in detecting invisible flames caused by the splashing of molten lead, yellow or blue welding flames, as well as solid red flame. Flame detector mounts directly on gas piping * Audible alarm

Infrared Flame Sensor C7915A1028 Features Limit control maintains boiler water level • Threaded stem and flanged lead Sulfid body feature a visible float adjust Float, and are weight compensated for horizontal installation • 1/4-turn connect/disconnect connection selec

The Honeywell Flame Sensor is a solid state, non-contact infrared sensor used to trip the control circuit of either heat producing appliances or pilot operated devices. It is factory calibrated to provide proper response in more than one million cycles and can be factory recalibrated providing a life expectancy of over 10 years. The electrode assembly contains two platinum resistance wires that are stabilized by the formation of lead sulfide on the detector surface. It also yields high sensitivity at high temperatures (above 850°F [ 450°

This Infrared Flame Sensor can be used in conjuntion with the Flame Sensor Optical Intrusive Switch. It is has several outstanding features, such as: Constant Current Output, up to 4 Amps; Two wavelengths (950m and 1000m) for flame detection at different times; Sensitivity adjustment from the front of unit using a potentiometer; Forward Voltage VF Circuit, Current sink 20 mA.