Carrier 330819-401 Bryant/ 330819401 3/8" LIQUID LINE SERVICE VALVE

"3/8"" LIQUID LINE SERVICE VALVE"

The Carrier 330819-401 Bryant/ 330819401 3/8" LIQUID LINE SERVICE VALVE.

Carrier 330819-401 Bryant/ 330819401 3/8" LIQUID LINE SERVICE VALVE

Carrier® 3/8" LIQUID LINE SERVICE VALVE. Economical gas regulator for use on systems containing up to 85% CO2. Do not use with other gases.

The Carrier 330819-401 Bryant/ 330819401 3/8" LIQUID LINE SERVICE VALVE delivers precision performance for your home while keeping operating costs down. This system delivers the high level of efficiency you expect from Carrier while keeping installation costs to a minimum. It features an industry-leading filter drier design that helps to ensure reliable operation while significantly extending the service life of your air conditioning system. The Carrier 330819-401 Bryant/ 330819401 3/8" LIQUID LINE SERVICE VALVE also comes with a ten year limited warranty to cover both its compressor and exterior coil!

The Carrier® 3/8" Liquid Line Service Valve is designed to help reduce unwanted water backflow into the evaporator during service. It mounts easily off the side of the condensing unit for a quick connection to a technician's torch, which allows them to quickly and safely remove a valve stem line from the system without damaging the appliance.

The Carrier® 330819-401 Liquid Line Service Valve, part of the wide selection of Carrier® brand irrigation valves, delivers drops in pressure in seconds in response to changes in elevation. The quick-fit manual service valve is 3/8'' NPT and can be installed above or below ground. The action of the rod activates the shut-off feature. For use with Brinly® Commercial Products, BluePride® brand, Green Thumb® brand, Irritrol® brand, Rain Bird® brand, Toro® brand and Weathermatic® residential irrigation controllers.

Compatible with 3/8" fire service connections, this service valve features 1/2"" female NPT takeoff connections and a slip ring to provide circular rotation of the handle while maintaining constant pressure on the three handles. The handle assembly comes with U-shaped handles and the 1/2"" female NPT takeoff connections, and this compressor connection is designed for copper lines and 2 to 2 1/4"" tubing.