Carrier 338635-751 KIT VENT CONNECTION

KIT VENT CONNECTION

The Carrier 338635-751 is designed for use with any unit capable of flue exhaust (direct venting). This Kit Vent Connection can be used to replace or upgrade your current vent system.

This Kit Connection Screw Valve Assembly connects the vent connector to the heat pump.

This Carrier 338635-751 Vent Connection Kit is a replacement vent connector for many Carrier gas furnace models. The tubing in this vent connection kit measures 11-1/4 inch long and the elbows measure 6 inches. Use this kit to connect between the supply duct to the furnace and outdoor air intake line.

This kit eliminates the need to drill a hole in the wall of the home for ventilation. It includes a 3-section vent connector hose with built-in damper and a condensation cover for interior units. Unit must be vented to outside air. Recommended for temperature range above 50 degrees F (10 degrees C). For use with Carrier Heat Pump Systems only, Series H0A, H1A, H3A,H8A-200, Huc10014ra01a280#.

The Carrier 338635-751 is a vent connection kit designed for Carrier furnaces and central air conditioners. The energy efficient vent provides a direct through path for air to be distributed and helps prolong the life of your system.

This Carrier kit contains the vent connector, gasket and screws for mounting and attaching your compatible indoor air cleaner to your compatible Carrier central air conditioning system. The Carrier/Bryant system compatibility list is available on our website at www.carrier.com and is also available through your local Carrier distributor. Contact your distributor for more information about the specific supply line that matches the airflow inlet and outlet configuration of your unit. Note: Before connecting this kit, consult all installation instructions provided by Central Air Incubator Co (CAIC) with respect to the use of this kit for the make/model of your central air

The Carrier Ventilation Kit is used with carrier brand gas and oil furnaces and heat pumps to allow for venting in the attic or crawl space. The kit connects the ship-in pipe of the furnace with the outside vent using flexible, polyethylene tubes that fit around vent ends and through the unit.