CARRIER HN52PD024 CONTACTOR < 60V > 10 CONTACTOR < 60V > 10

Contactor 3p 24v 40amp

Contactor 3p 24v

The CONTACTOR is a 24V DC 40A MAX contactor with push buttons, plug in type. Maximum voltage can be 60V DC.

This contactor is wired for 60V which means it can handle upto 10amperage in load and is normally used to switch on gas valve for grilling purpose.

Contactors are used to control contactor sets that are designed to handle inductive or capacitive loads. With a current rating of 40Amps, this particular contactor has a voltage rating of 240 volts and is capable of handling 10 circuits. Contactors are industrial-grade components that are capable of switching larger currents and more amperage, whereas a relay switch is generally used for smaller currents and lower amperage.

The Carrier HN52PD024 contactor is a solid-state, cast-magnesium, -40 to 231 degree F [min to 30'C], two pole, three phase, 60 volt AC/DC, 10 amp contactor.

The HN series is a double-connection design and are widely used for small motors, small pumps, centrifuges, compressors. This contactor has the advantage of high starting torque can be used as motor contactor, pump contactors motor starter, centrifugal motor starter, compressor control relay. This series also has automatic reset function and can replace traditional magnetic contactors.

Whether you are in the residential or commercial construction business, you'll likely need a new contactor every now and then. Make sure you get one that is fully enclosed; then watch as your project gets done without a problem.