Compact CO-48359 BELT, EXL MG1 AND MG2 LUX PN5 & PN6 GEARED 3/8"

BELT, EXL MG1 AND MG2 LUX PN5 & PN6 GEARED 3/8"

The Compac CT-48359 is used on - model CO-232, CO-236, - Mfgr. Westendorf Part No. 130-242 , BELT, EXL MG1 AND MG2 LUX PN5 & PN6 GEARED 3/8"

A multi-purpose belt that can be used with both the MG1 and MG2 Lux LUX PN5 or PN6 Geared motor. (The belt is not compatible with other tools of other manufacturers.)

This drive belt is a replacement part for the Lux Pro models: MG1 and MG2. The belt is a 3/8" pitch, model number CO-48359. This belt is a direct replacement and is designed to fit the model listed above only.

The Compact CO-48359 belts are compatible with DeWalt 20V Max tools which include the drill/driver, impact driver, jig saw, circular saw, and reciprocating saw. Not all older DeWalt 20V Max models have the same motor attachment (gear) threads. These belts are compatible with PN5(grey) and PN6(white). To know if your tool has PN5 or PN6 gear threads, please refer to your tool specifications below. The bottom of each specification page will tell you which gear thread applies to your tool(s).

This is a new belt made from solid nylon with a matte finish which is part of the updated Elite Series. This belt is 3/8" wide and the length has been added to be 48". It is also coiled for easier handling.

Eaton's Compact CO-48359 Belts consists of a 3/8 Idler and Pulley System for Bowden cable actuated weapons in an easy to install package. The Compact Idlers are only 1 inch (25mm) diameter so they can be installed in areas of very limited space. The pulleys are sized to maintain proper overhung load throughout the idler's travel."

The Belts are manufactured with all-new tooling to the performance standards of the original manufacturer. This results in improved product quality and performance over the belts made overseas by other vendors and sold in our industry today.