Johnson Controls C450CCN-4 ControlModule 2SPDTRelayOutput

ControlModule 2SPDTRelayOutput

ControlModule 2SPDTRelayOutput has a wall mounted enclosure and is a secondary power supply for use with up to two single-pole double-throw (SPDT) non-fused relays. Driven by a simple algorithm, this relay features a standard set of terminals including Driven, Normally Open (negative), Normally Closed (positive), T0, and common.

The C450CCN-4 ControlModule 2SPDTRelayOutput, controls HVAC equipment using a simple set of speed and direction signals.

The C450CCN-4 ControlModule 2SPDTRelayOutput is a Johnson Controls brand of relay. It provides complete monitoring, control, and interface capability to RC motor loads. This compact design is ideal for applications where space is limited.

When the temperature calls for comfort, turn to the Johnson Controls C450CCN-4 ControlModule 2SPDTRelayOutput. This module provides easy installation and adjustment capabilities for an efficient heating and cooling system. Also, it uses top quality construction materials. Take control of your thermostat!

The 2SPDTRelayOutput provides user control of slow acting fuses or relays. The 2SPDTRelayOutput has two timed outputs with rates programmable to 12 seconds or 24 seconds; each output may be programmed independently. These timed outputs are used to switch off certain functions after a pre-determined time. The Slow Acting Relay (SAR) version, for slow acting fuses or relays, can switch up to 10A at 250VAC.

The is an output module used in the Johnson Controls 2SPDT relay control system. The control module has three modes of operation: Pulse, PulseDelay, and OneShot. Each mode produces a different delay length of time which allows for handshaking between multiple devices.

This ControlModule is a programmable (2) Stage, (3) Delay Ac output relay. The CM550 offers electronic switching and provides enhanced power management for use with most major HVAC manufacturers systems.

The C450CCN-4 ControlModule is designed for use with the following thermostats:

This 4-output relay board provides a convenient way to control four different devices, including lights and pumps. It has a relay output for each of the four outputs.

The C450CCN-4 is a solid state controller designed to operate air-cooled 480 volt Class C heating and cooling panels in a two speed fan application. The unit comes with two 24 V relays for the switching of auxiliary equipment such as roof exhaust fans. The unit requires a 24V SPDT contactor for start-up and a thermistor to control the set point of the air conditioner.

Zone valve control, typically used for controlling a single zone, 2 – 2/11 amp contacts, C450 control module

JohnsonControls C450CCN 4-Output Relay-Controlled PowerModule with Solenoid Input is an advanced relay for control of load devices. It provides high reliability, long term availability, and high accuracy in load switching. The C450CCN is primarily used in duty cycle applications primarily using two phase motors. It also can be used to drive static valves when properly grounded.