Copeland 918-0028-00 Crankcase Heater 120v 100w Insertion-must be used W/well 2D,3D,4D/4R,6D/6R,9

HEATER-100W/120V

Copeland 918-0028-00 Crankcase Heater 120v 100w Insertion-must be used W/well 2D,3D,4D/4R,6D/6R,9 Beige HEATER-100W/120V

The 918-0028-00 heater is a 100 watt, 120 volt heater of high quality which is used within the Copeland scroll BXN2,3/BXAV4,5B/B57D and CCV1,2/CCD-06H compressors.

The 918-0028-00 Crankcase Heater 100 Watt is a 120 volt, 100 watt replacement for the Copeland brand cylindrical oil heaters. It works with units that have Well 2D, 3D, 4D/4R, 6D/6R, or 9 on the nameplate.

Model 918-0028-000 is a small, low wattage, 120 Volt heater. This item uses a 1 in. NPTL threaded inlet and outlet tube, allowing it to be used with or without a shroud on the discharge/exhaust end. The heat exchanger is finned with aluminum fins and has deionized water pumped through it, which cools the air exiting the blower, effectively reducing the temperature in your freezer.

Designed for use with Copeland brand heat exchangers: 2D,3D,4D/4R,6D/6R, and 9.

Heat exchangers are an essential part of any cooling system. While no replacement can be used in place of the original, this product is designed to fit directly into your original equipment housing as a compatible alternative.

Our Heat Exchangers are designed to integrate into Copeland Scroll™ compressors. These heat exchangers are normally not for replacement on existing systems or as retrofits. These heat exchanger are specially ordered and the lead time is about 6-9 weeks after special order authorization.