Copeland 921-0234-00 Connector Block Kit

Connector Block Kit

The Connector Block Kit is designed to connect two ducts together for venting these products. This product is made of sheet metal with a balancing damper to prevent back drafts. It comes with a pre-installed linkage valve and filter to filter dust from the air being exhausted from the range.

Connect multiple Copeland refrigerator and freezer model components and end-to-end with this handy Connector Block Kit. It features the same low idle and quiet operation as the other Copeland compressors. The kit includes a Model 90QABB expansion valve, Model 90YF1 condenser, Model 90YK injection valve, Model 90QASD evaporator, and a Model 90B824 compressor

Copeland's Connector Block Kit is ideal for replacing original equipment parts that are prone to failure or can be more efficiently replaced with updated Copeland Connector Blocks.

The Copeland 921-0234-00 Connector Block Kit is used to install a 1/2" NPT connection on the 921 packaged unit. Includes stainless steel block and stainless steel flange. 1/2" NPT adapter sold separately as part of the S-4008O-0000 mounting flange assembly

The 921-0234-00 replacement connector block kit is for use with Copeland Scroll CHU, CHH, CNW, CNC compressors. It includes 4 suction line filter driers, 4 discharge line filter driers, 4 pressure relief valves and 2 plug fittings that are used for common field installation of the suction line filter driers and pressure relief valves. Connector Block Kits can also be used as a convenient way to order spares for existing holdings of compressor parts.

A heavy-duty connector block kit designed for Copeland brand gas equipment.

This module is designed to provide a quick and easy way to convert a three-phase bus to single phase, providing the installer the ability to control 3-1/0 devices. The unit incorporates four single pole breakers capable of switching 120 VAC at 10 - 15 A each. It is UL listed for 3 wire service and manufactured with an integral fuse holder. All Copeland Connector Block Kits are made in our Matsushita Electric Works factory in Japan. Imported.

This connector block kit is designed to connect existing ductwork in applications where you need to vent your air conditioning system outdoors. These connector kits are made of galvanized metal, and are designed to work with Copeland Scroll® units that use 17-1/2-inch (445 mm) round ductwork.

Copeland 921-0234-00 connector blocks attach to the enclosure of your indoor air handler, furnace, and other central air conditioner components to ensure they're properly sealed and functioning efficiently. This package includes two 4-way XC connectors and one 15-way MP connector, for air handlers and terminal units with 4 or more vertically oriented terminals. These connectors block ambient air from infiltrating the system and causing it to work harder than it has to. Every little bit helps, and this kit is a great move towards better comfort and energy efficiency.

The CBK is designed to provide airtight connections to the compressor terminals in the air conditioning system. It features a 1/4" plug that connects directly into the AC port on the outdoor line side. An adaptor is included for 12 volt auto compressors.

Offers fast installation of older outdoor furnace models. Connects two-stage gas valve to carrier gas lines. Nickel-plated brass unit with cast copper hub, complete parts list included.

Equipment Condition : New