120V ACTUATOR DRIVE REPLACES CP-839
Barber-Colman/Schneider Electric 50898 ACTUATOR DRIVE CP-9302 is a 120V plug-in module designed for use with various model Standard Air and Gas Compressor drives. It consists of an adjustable voltage DC motor control, frequency converter, one rack space mounting panel, wire harness and four 34 mm metric threaded conduit openings on the back panel. This unit replaces CP-839 drive as part of a retrofit
Schneider Electric has designed the CP-9302 Actuator Drive to provide reliable, long life performance for Barber-Colman gas heaters. The drive is a direct, no extra parts, replacement unit for the CP-839 actuator drive that was offered under a prior replacement program.
The CP-9302 is a 120V AC drive that replaces the CP-839. It has 2 auxiliary ports for connecting analog inputs to protect sensors and switches used in liquor, rack cooling, etc. The CP-9302 offers industrial performance and solid state reliability at a competitive price. Specifications: Mounting: 3 inch screws, 1/4 inch hex nut Actuation mode: 24 VAC 50/60 Hz, 4 to 20 mA input circuit(s) Output power: 120
Schneider Electric 50898 Barber Colman CP-9302 linear actuator drive. 24 VDC, 120 VAC, 240 VAC power input with control.
The CP-9302 is an actuator drive designed specifically for the CP-B890 and CP-B893 control panels. This AC motor assembly delivers output speeds of 0.015 to 0.25 RPM and 24 VAC to 240 VAC. The output direction can be reversed and the output speed can be increased by using external shaft connections.
The CP-9302 is an electric, self-contained, pneumatic proportional valve drive that converts low voltage, 24V or 240V analogue signals to high pressure, 120V proportional control signals.
The Schneider Electric 50898 Drive provides an interface from a low-voltage (24-120V, 4-20mA) output device to the 24V Plunger Actuator in a Barber-Colman CP-9000 Series Combustion Control. The 50898 Drive is powered by a non-removeble terminal strip supply which provides 24V DC.