EATON C25DND330B , Cutler Hammer C25DND330A Contactor 120V Coil

208V 30A 3Pole Contactor

The Eaton Cutler Hammer C25DND330BN is a 208V 30A 3Pole Contactor. This product has been discontinued by the manufacturer and is no longer available.

The C25DND330B , Cutler Hammer C25DND330A Contactor 120V Coil 208V 30A 3Pole Momentary Normally Open Relays Contactors offers a wide variety of application possibilities in commercial and industrial control applications. Their design makes them ideal for use in high cycling applications that may require frequent on/off operation. When you need to operate higher currents such as motors, solenoid valves and other inductive loads, use the C25DND330B , Cutler Hammer C25DND330A Contactor 120V Coil 208V 30A 3Pole Momentary Normally Open Rel

C25DND330B , C25DND330A Contactor 120V Coil 208v-208v 3Pole for Cutler Hammer

Our 208V, 3-Pole 30Amp Contactor features a coil voltage of 208V and contacts of 25 Amps/60VDC. It is made of high grade copper alloys for maximum current handling capacity. This particular model has the ability to switch 120 Volts AC or 240 Volts AC. The Contactor euipment is used in residential and commercial air conditioning and heating equipment.

The C25/D Series Circuit Breaker 30A, 120 Vac, 208-230 Vac No Latching Coil: 1 Pole (C25DND330) is the replacement for the following obsolete part numbers and is listed for use on the following equipment age ranges:

The C25DND330B Tripping Time Combination Breaker is a Heavy Duty General Use Contactor Tripping Device with a 1.05 second discharge time built to UL 489 requirements. It meets the demanding application requirement for Definite Purpose applications where frequent cycling...

The C25DND330B is a 120 volt AC coil for use with the Cutler Hammer 15P900 series of contactors. The internal solid state SCR provides reversible, adjustable overcurrent protection; reverse-polarity protection; and short-circuit protection. The phase inductive current trip device is programmable and the circuit can be opened by an external auxiliary switch or close under load on any phase.