EATON H2014B-3 Cutler Hammer- 23.5-38.5 Heater Pack 23.5-38.5 Heater Pack

23.5-38.5 Heater Pack

The 23.5-38.5 Heater Pack is designed to provide auxiliary heating to a variety of locations on the BH1, BH2, BH3 and BH4 Breaker Boards. It has 1/4 in 14 terminal connections for 120/208V AC Heaters.

H2014B-3 23.5-38.5 Heater Pack

The Eaton H2014B-3 23.5-38.5 Heater Pack is a 4 wire tapped heater that is designed for use as a back or primary heating element in very large air conditioning and heating systems. This bundle comes with 3 terminal connection cords that are suitable for the many different configurations of H-80 series thermostats, including the Heater Only and Pack Only models that both require 2 connections for wiring.

The Eaton Cutler Hammer H2014B23.5-38.5 Heater Pack is a perfect addition to your heat system, and can be used with both the DH-2 and DH-3 transformers. These cuts are designed for 23.5 through 38.5 kVA, and come with flush ear bars or hexagonal nuts on the front of the cutters for easy access to bolts and screws behind it.

The H139B-3 heater pack has a 1/8HP motor that produces 5.6amps. Pack includes heater, mounting bracket, and hardware.

The H2014B-3 is a complete three phase, 208/230 volt heating and air conditioning package that includes the TH23R, 23.5KW 240 volt heater, vertical condensing unit, round duct heat exchanger and a 208/230 volt electric furnace.

The H2014B-3 Eaton Cutler Hammer heating pack is a self-contained, sealable and refillable temperature controlled canister small package which will operate in both hot ambient and below 0º Fahrenheit temperatures. It is ideally suited for use as a replacement or addition to electric or storage heating.