Johnson Controls 7459 PNEUMATIC ACTUATOR 3 STROKE 5-10#SR 150# POWER S

PNEUMATIC ACTUATOR 3 STROKE; 5-10#SR; 150# POWER S

Our PNEUMATIC ACTUATOR 3 STROKE; 5-10#SR; 150# POWER Series 7459 is great for simple compressed air locomotion projects like carousels, chutes, conveyors, and humidifiers. This air power actuator delivers big strokes (0.28" to 6.1") at low air consumption (89 to 615 SCFM / at 300 PSI).

The Pittman PNEUMATIC ACTUATOR 3 STROKE 5-10#SR 150# POWER S is a pneumatic actuator for use with T200 and T400 valves.

Johnson Controls 7459 Pneumatic Actuator 3 Stroke 5-10#SR 150# Power S

The Johnson Controls 7459 Pneumatic Actuator 3 stroke 5 to 10#SR, 150# power S is used on Johnson Controls Workforce Pro line of walkie stackers. It push pull parallel action, the two stage position. The mounting position for this actuator is right or left hand mounting.

Johnson Controls 7459 Pneumatic Actuator 3 Stroke 5-10 PSI 150 PSI for more product details click here

Our 7459 Pneumatic Actuator is a 3 stroke actuator, filled with 150# Power Stroke Oil and comes with the relief valve and connector. This unit will work in our hydraulic 3 circle braked system.

The Pneumatic Actuator 3 Stk 5 10 150 is used for lifting, lowering, retracting or driving loads. This Air motor is installed in the cylinder of braking system or shaft for driving load.

The Johnson Controls JCI 7459 Pneumatic Actuator 3 Stroke is useful to control two-stroke pumps. The actuator will give you great performance and smooth movement, making it very reliable for your system.

This accessory acts as an accessory for Air Actuator, 7456A. Pneumatic actuation is made by adding an air cylinder to fixed position of Pneumatic Actuator.

The PN Series pneumatic actuator is primarily used for 3-way pneumatic directional control valves. They are constructed primarily of noncorrosive, electrically-insulating plastic, featuring stainless steel hardware where required. They are designed primarily for use in clean, dry locations.

The 7459 Series 3-Actuator Push Button Control Valve are designed to control air flow to pneumatic cylinders. The valve consists of a 3-position selector, pilot operated check ball, double position solenoid valve and bleed air relief valve.

Specifications: