JOHNSON CONTROLS D-3153-4 D-3153-4 PNEUMATIC PISTON DAMPER ACTUATOR 8-13 PSI

PNEUMATIC PISTON DAMPER ACTUATOR 8-13 PSI

JOHNSON CONTROLS D-3153-4 D-3153-4 PNEUMATIC PISTON DAMPER ACTUATOR 8-13 PSI

Contains the following descriptors: JOHNSON CONTROLS, 8-13 PSI, D-3153-4, PNEUMATIC PISTON DAMPER ACTUATOR

The Johnson Controls D-3153-4 Pneumatic Piston Damper Actuator 8-13 PSI has a maximum opening of 4 qt. each way and is perfect for controlling the temperature in your room.

This Pneumatic Piston Damper Actuator is designed for 1/2 inch or 5/8 inch (16 or 20) OD copper line 30 psi and 10 to 40 degree C. The internal piston is 105 degree C. Duty cycle is approximately 50 to 100 cycles per minute depending on air supply pressure. maximum capacity 110 W maximum capacity 110 W at 230 VAC. Also suitable for use with 36 volts DC or 110 volts 50/60 Hz AC power source . It has the following features: Open circuit output pressure 8-13psi at 230 VAC.(other voltages are available upon request) Working

The D-3153-4 is a pneumatic piston damper actuator that operates at pressures of 8 to 13 psi. It was designed to control space heating application for commercial, industrial, and utility buildings up to 20 floors high. The D-3153-4 controls gas-fired furnace dampers, and moves between 30 and 45 degrees based on the size of the piston.

Pneumatic Piston Damper Actuator 3153-4 is much like its cousin for gas furnaces, the Barometric Pressure Regulator. The major difference between the two is their control systems. The air-operated damper uses a remote control solenoid and a transmitter for its control system. The barometric pressure regulator controls gas to both its vari-power and the blower in the furnace. When using the pneumatic piston damper actuator, you place it inside of an air duct and attach tubing and valves to it to then connect it to your cooling coils or equipment that requires adjustment based

The D-3153-4 Pneumatic Piston Damper Actuator is used in applications requiring the control of temperature, humidity, or pressure; it features a positive closing function.

The D3153-4 is an external piston pneumatic damper actuator with air inlet, for use on heating and cooling systems.

Pneumatic Actuators are used for applications where power is not required or where mechanical power is needed. The standard version of this product is ideal for low pressure automatic dampers. These actuators are designed with spring return, friction control and long term reliability. A pulsation damper provides rapid down stroke and flow control for maximum energy efficiency per stroke.

The D-3153-4 is designed to control the air supply to a building. It utilizes a piston style damper actuator. The damper is connected directly to the low pressure branch of the air-conditioning system, therefore it responds quickly to change in conditions. The D-3153-4 is packaged with a 1/2" FNPT port connection and a mounting bracket that fits into a 1" drop ceiling grid.

Continuous damping of the process gas is achieved using this direct acting piston vane damper. The highly flexible design of the piston ensures stability over the zero dead band. It can effectively actuate to stop high pressure surges within the system, to thereby protect marine lubrication systems vitally needed in marine applications. This component is designed for housing in stainless steel or carbon steel canisters with sizes ranging from 2 1/2 inches diameter up to 7 1/2 inches diameter.

This Johnson Controls D-3153-4 damper actuator is compatible with residential gas or oil furnace models. It comes complete with female female inlet/outlet connection ports and is suitable for installation in the front of the fireplace.