Johnson Controls D-3153-1 Johnson damper actuator 3-13# spring range W/D9502

DAMPER ACT. 8-13# W/POS

The Johnson Controls D-3153-1 Johnson damper actuator 3-13# spring range W/D9502, from Johnson Controls Commercial Solutions. Commercial zone damper actuator 8-13# spring range with a pulse width of 1.9%.

Regulate airflow with these Johnson Controls D-3153-1 damper actuators, which work with the company's D9502 baseplate and 8-13# springs. You can choose from eight different switches and four applications to fit your specific requirements. installation requires: wiring circuitry and a terminal strip for each package required for operation

The D3153-1 actuator is for damper products with a service factor of 2 or 3.OPERATING SPAN RANGES FROM 8 TO 13# AT CLOSE AND 1 TO 3# AT OPEN. It can replace the following actuators: D3152-1, D3250-1, D3152-2, D3250-2

The Johnson Controls D-3153-1 Johnson damper actuator 3-13# spring range W/D9502, is constructed with powers & controls right at your fingertips.

Johnson Controls D-3153-1 damper actuator with a 3-13# spring range and a W/D9502 white nylon spindle. The "D" pot position fits 8-12# coil springs, the spring load adjusts from 10-13#. Compatible replacement for part numbers: D3153-1, 21353001AC, C2258-210C210, C2258-500C500, C2258-510C510, 5483478A1A, W10546021R.

The Johnson Temperature Controls Damper Actuators are designed to control a HVAC dampers accurately and to precisely set the position at a desired position. This bi-directional actuator is suitable for 8-13-lb balanced spring sizes. It features a series wound DC Motor with field coil and mechanical limit switch for positioning feedback.

The D-3153-1 Johnson actuator is used to control damper position on K-19 series temperature dampers. Damper actuator spring range W/D95002 THRU W/D9503.

Functionally positive, these five-position regulators are available in 13# to 27# spring configurations. They have a small size factor, bolt-on mounting brackets, are complete with all hardware and provide motorized output to accurate digital full scale damping control. They are NEMA 4 rated for indoor or outdoor operation. Aluminium body construction provides maximum heat dissipation and is anodized for durability.

The Johnson Controls D-3153-1 Actuator is a replacement damper actuator. The actuator control shifting between heating and cooling settings in an air conditioner or furnace and is located in the thermostat housing. It contains a motor that moves the spool in response to instructions from the thermostat and the amount of current applied to it. Actuators are available with various spring ranges for various load levels. They are also available with different set points from 1 through 10 to allow for control over a varied number of different loads.

The Pro-Link™ is a direct acting damping device that is used in conjunction with the rider's weight, the speed of the machine, and the terrain to regulate movement. The Pro-Link™ moves up and down on its hinges as the suspension moves. The damper cable attaches to the bottom end of the Pro-Link™. The cable moves back and forth along its cable guides, pulling on the bottom end of the damper rod which moves up and down through its two mounting holes. The Pro-Link™ can be adjusted using shims between its mounting bolts. The range of adjustability for this dam

The Johnson And Controls Series S86/S86L Series Actuators Are Designed For Smaller Heating & Cooling Systems Where A Wide Adjustment Range Is Not Necessary. Ideal Where Only A Few PSI Adjustment Is Required.

A control device that regulates the flow of a fluid or gas by mechanically variable restriction or obturating.