Johnson Controls M9220-BGA-3J DAMPER ACTUATOR 20NM SR ON

DAMPER ACTUATOR 20NM SR; ON

Johnson Controls M9220-BGA-3J Damper Actuator 20Nm Sr On 56710001

The M9220-BGA-3J Damper Actuator is a field reversible, non-adjustable actuator designed to close contacts for the hi-side limit switch of the Johnson Controls DI3000 series damper actuators that have a Johnson Controls 20NM spring return. The M9220-BGA-3J is rated at 3A/250VAC and 20Nm of compression force.

The M9220-BGA-3J is a 20Nm, 100~240VAC 50/60Hz damper actuator with double end and slow response. It significantly increases the level of control and automation capabilities of the Johnson Controls BACnet Building Automation System (BAS). The double-ended actuator can be installed at either contact.

The Johnson Controls M9220-BGA-3J damper actuator is a pneumatically proportional controller for conduit terminal boxes. The M9220-BGA-3J has a 20 N/m linear range with a throughput of 500 m 3 /h . It is NAMUR NE 143 081 certified.

This damper actuator is a replacement component for Johnson Controls systems. It is designed for use with control system components to provide regulated airflow from a duct to an outlet.

The Johnson Controls M9220-BGA-3J is a damper actuator module with SR mounting. Its applications include: Air conditioning and refrigeration, Heating and ventilation, and HVAC DC drive systems.

Through a special innovation program, Johnson Controls has developed a new technology to combine the energy efficiency of its energy management systems with the worldwide compliance of its damper actuator products. Every M9220-BGA-5J series damper actuator control is custom made specifically for your application and will require a customized commissioning process to meet your precise needs.

The M9220-BGA-3J is a stand-alone damper actuator in a direct drive package with a fixed frame. This actuator has a output shaft diameter of 1/2 in. and a damper rod length of 4 in.. The M9220-BGA-3J is capable of operating at ambient temperatures from -80 °C (-112°F) to 275 °C (527°F).

A damper actuator is a mechanical device used to control ventilation in buildings. It is similar to a ventilation damper, but operated by an electric motor and servo control.

Typical applications include control of hot and cold air dampers in high-rise commercial and residential buildings, ventilation systems, washers, dryers and other devices that utilize electrically-controlled dampers. The modular construction results in a compact actuator with few individual parts and easy user access for maintenance or upgrades.

A general purpose linear actuator designed for both in-line and off-center mounting in control systems, valve control systems, load leveling devices, weighing devices, belt drives and many other systems requiring a straight or contoured path. This brushless DC servo motor is capable of high power output in an extremely compact form factor for easy integration into control systems. The brushed version is equipped with enhanced gear box protection for increased wear life.

The M9220-BG series actuator is a high reliability, general purpose, electro-mechanical positioner that provides precise control over the adjustment of airflow settings in the presence of wide ambient temperature fluctuations.