Danfoss 013G-0140 013G0140 Click to Open Expanded View Non-Electric Zone Valve Body

1/8" NPT. VALVE BODY FOR 1 PIPE STE

This Danfoss 013G-0140 013221100 Click to Open Expanded View Non-Electric Zone Valve Body *** 1/8" NPT. VALVE BODY FOR 1 PIPE STE(2) Heat Exchanger, Use for Zone Valve Bodies in Expansion Tanks and Direct Fired Scale Removers, Material Not Designated By The CSA Manufacturer As A Primary or Secondary Pressure Containment Item.

Danfoss EXZ 013G-0140 013G0140 Click to Open Expanded View NON-ELECTRIC ZONE VALVE BODY FOR ONE PIPE STEAM LINE. 1/8F TUBING, 1/8 TUBE OD FLAT FACE DISC EQUIVALENT PART NUMBER: 20S4910-1, SSNA1246D, 15M1365.500A0100 044FB-R5B10,

The Danfoss non-electric zone valve is a non-electric zone valve for 1 pipe steam systems. It has a ¼” male NPT port and a ¾” female NPT port, with a method for heating the solenoid and valve to prevent freezing in cold conditions.

To see the complete list of features, click Open Expanded View. The Danfoss 013G-0140 013G0140 non electric zone valve body is ideal for commercial and institutional applications in air conditioning, refrigeration and HVAC systems. The large barrel threads of this zone valve make installation easier due to the wide range of available piping size options (#10 through 1_") as well as a traditional pipe thread size (1/8" NPT).

A Danfoss brand solenoid style non-electric zone valve body. This white zone valve is designed to work with single point pressure switches. The DN013G0140 is designed for applications with up to 2 pipe threads and comes with 10 feet of wire connected to the valve. The 03G1 model works in more than one position when installed allowing for easy adjustment of the set point of the high pressure value system.

For non-electric zone control of steam and water heat, gas fired boilers, and hot or chilled water systems. Suitable for installation in concrete or steel reinforced basements. Includes drain-back heater and tubular sensor. 013G0140 Description Zone valve body, temperature control without electronic impulse, standard design with external threads, 1/4 HP borek 4 gang/gangway, without connectors, pneumatic swivel lugged torsion spring for temperature control (20

Part Number 0.0742.016 Tech support to address specific application questions Line voltage, 120/240 ± 10% VAC Maximum pressure rating to 400 PSI at 180°F @ 1.8 GPM Flow control to 3 GPM with a FL6-N flow limiter switch and 2.5 GPM without ± 10% Flow accuracy is 1% of maximum flow or 1 GPH whichever is greater Water tight seal on the body of the valve will withstand