Danfoss 018F7658 208-240V 14W DIN Connect Coil 208-240V 14W DIN Connect Coil

208-240V 14W DIN Connect Coil

The 208-240V 14W DIN Connect Coil is the replacement for Danfoss coil 018F7658. This wire wound solid state time delay relay is designed to limit overcurrent using a modular design which can be configured as an ON delay, for example, during motor starting or OFF delay to limit a motor speed and stop inrush current that exceeds permissible values that might occur during fast switching. The module can be also used to restart a reversing induction motor provided that 50ms starting protection time is available.

The Danfoss 018F7658 208-240V 14W DIN Connect Coil has the following features:

Transform 208-240V AC power from your home's main power panel into the DC power your heat pump needs to run with the 018F7658 208-240V 14W DIN Connect Coil. This easy to install system features a quality built coil that comes in various length to fit tall or short furnaces and air conditioners. The coil is designed to ensure that you're receiving the maximum amount of heating and cooling power (up to 15 SEER or 14 HSPF) for your home. Includes mounting brackets and jumper wires.

The Danfoss 018F7658 208-240V 14W DIN Connect Coil is three phase coil. It comes with a temperature of - 45°C~ + 50°C, resistance of 175 Ohm and a length of 2.48 m. The model number is 018F7658.

The Danfoss 018F7658 208-240V 14W DIN Connect Coil is a part of the Danfoss family of products. This brand is best known for its continuous effort to create innovative, user friendly heating solutions. Our Danfoss air handlers and split systems are now available for purchase at Easy Living Products, making it easy to get the high-quality equipment you need.

The Danfoss 018F7658 208-240V 14W DIN Connect Coil has a rated frequency of 50Hz and an AC application of 3 Phase 200-265V. This coil utilizes a circuit/reactor pilot burner.

The DANFOSS 018F7658 208-240V 14W DIN Connect Coil is designed for heating 1/2" copper tubing when used with the DANFOSS heating products (PDF document)from 2" to 8" diameter. The coil is in accordance with EN 1254-1: 2005 and can be used in two-, three- and four pipe systems. The present coil has an insulated housing of polypropylene based on a thermoplastic compound, two copper terminals for connection, an additional terminal for a transformer connection and grounding pins.