Danfoss 042N7551 24VDC COIL W/DIN CONNECTION 24VDC COIL W/DIN CONNECTION

24VDC COIL W/DIN CONNECTION

Danfoss 042N7551 24VDC COIL W/DIN CONNECTION Features 24VDC COIL W/DIN CONNECTION Danfoss Part #: 042N7551 Email questions or comments about this item to [email protected] Coils help induce pulses of current into the refrigerant for proper metering of refrigerant flow. Look for Danfoss part numbers ending in A, B, or C which are common applications on systems

6.0W; 24VDC 1.9A 2 Ohm 042N7551 6.0W; 24VDC 1.9A 2 Ohm 042N7551 24VDC COIL W/DIN CONNECTION

Danfoss 042N7551 24VDC COIL W/DIN CONNECTION iximap_property_en-us

Danfoss 042N7551 24VDC COIL W/DIN CONNECTION

This Danfoss 042N7551 24VDC COIL W/DIN CONNECTION is designed to be a direct replacement for any OEM part number that ends in -022, -48, -73, -80 & 041. It is a 2 wire lead coil with wiring terminals on the top and bottom of the terminal block, and connections are made via high temperature tin-plated copper crimp connectors. The mounting flange is integral to the terminations and cannot be

The Danfoss 24VDC Coil with Din Connection is an ATC( Air temperature compensated) 24VDC coil that converts AC voltage into DC. The coil maintains accuracy of operation under both hot and cold conditions. It can be used to power most compressor or cooling applications and is compatible with most down hole pump systems including electro-hydraulic systems and dry drilling. (e.g., drilling at low temperatures).

The 24VDC coil is used for Danfoss thermostatic expansion valves, zone control valves and building management systems. The FSP series has a Din conne tion for direct mounting of the FSP24A-3H, 3-pins switch and the FSP24A.10G10 connector is used to connect the 10m cable (supplied with the FSP system). Technical data: Contact capacity: rated load 0.5A(20mA) COIL 24