Danfoss 034G2323 8M CABLE FOR ETS/KVS W/M12 CON 8M CABLE FOR ETS/KVS W/M12 CON

8M CABLE FOR ETS/KVS W/M12 CON

The 034G2323 8M CABLE FOR ETS/KVS W/M12 CON cable is used to connect Danfoss VLTs, KNX or Micro-C controllers to KV Sets (Ethernet KV Sets for connection to the building automation network) with M12 Connectors.

The 034G2323 8M CABLE FOR ETS/KVS W/M12 CON is multipurpose and connects the Sensor Cable to the KVS Controller. It is a reusable cable and features type "S" connectors. It weighs 65g.

Designed to help keep the complex manufacturing process safe and precise, the 034G2323 8M CABLE FOR ETS/KVS W/M12 CON is part of a programmable proportional system that creates automated speed management. This cable can transmit accurate data using its 6-pin connector, helping to regulate the amount of output and input power.

Danfoss 034G2323 8M CABLE FOR ETS/KVS W/M12 CON

The M12 Connection Cables are used for connecting Danfoss Control Valves to control valves with M12 connectors. The 8 meters cable with connection terminals at both ends can be used either on the Combi Type or on the ETS/KVS control valves and is suitable for 2, 3-way, 1/2/3-way and 4-way solenoid valves (solenoids for ETS/KVS control valves) with M12 connectors.

This is the cable for installation of Danfoss ETS/KVS compressors. It has a Connector at the end. It has a M12 connector, a Length of 8 meter and a Wire Gauge of 0.5 mm2. The colour of the cable is Red-Grey.

This cable allows for the connection of ETS/KVS thermostat to a M12 connector for auxiliary control of the unit by an external source not equipped with a slave relay.