Danfoss 060-113766 KP36 PRESSURE CONTROL

KP36 PRESSURE CONTROL

The Danfoss KP36 pressure control comes with a suction cup and swivel, can be attached to the side of the hydronic heat exchanger or a cold water pipe.

The Danfoss KP36 Pressure Control offers a wide range of pressure ranges, pulsation dampening and adjustable spring preload. Features like these are what makes the KP36 the most suitable solution for applications where absolute control is required.

The Danfoss KP36 Pressure Control (060-113766) is designed to control the operation of variable displacement pumps. It is compatible with Danfoss NVR pump series, including NVR16/18/20, NVRS and NVRS XXL. The unit has been tested to prove reliable in actual indoor and outdoor installations.

The Danfoss Pressure Control offers time and energy savings for house installers and advanced controls users alike. Available with integral relay or external relays, our controls run from a standard 24VDC supply and are easy to integrate into any system. While the KP36 can operate at lower supply pressure, its auto-adaptive function allows it to run with supply pressures as low as 10 psig or as high as 50 psig. The KP36 has an internal memory that stores its latest settings and runs on a fraction of the power required by most time clocks. It also features a passive self-reset in case of power

Meet the KP36 pressure controller, the heart of a modern refrigeration system. For commercial and private refrigeration applications that require precise cooling temperature control.

The Danfoss KP pressure control is designed to be used with a manifold set-up. It features an SJ valve for easy installation. This model has an additional output in case you want to use it for additional devices and increased requirement. The device has a high-quality construction that ensures durability even when used under harsh conditions. When you decide to order this pressure control, you also receive wiring harnesses with which you can easily connect the device to your system.

This Pressure Controller keeps a constant pressure in the lines. This is important because variations in operating pressure interfere with accurate temperature control. This controller is designed to work with the Danfoss SK36.0 AHG/AHW pumps.