6"-108#Low/115-465High SPDT
5 amps; minimum voltage of 8V @ 0
The Danfoss 117-7058 is a starting device
The Danfoss 117-7058 Starting Device is an original Danfoss replacement part
This has to be one of the most popular products from Danfoss
5 to 10 amps
The Danfoss 117-7058 Starting Device is used for the following applications: Presses, Blowers & Compressors, Spinning, Thermal & HVAC
This particular series of devices can be used for engines with stroke lengths between 75 mm and 150 mm
5A at 28VDC for 200 cycles
It offers a 0-10V output to integrate with the user's proprietary controller or other control devices
Also, instead of only 2 mounting options available with the previous model, there are now 3: flush mount, through hole mount and round flange mount
The new 117-7058 Starting Device is a step up from the 117-7052, with added features that help make it easier to install
It is used when the engine lacks power, and can easily be replaced in case of damage or failure
The added "Stop" and "Start" buttons are now on the front of the device, as opposed to being placed behind the actual button panel which makes them much easier to see and use
It is designed to control the starting of a refrigeration system
The Danfoss 117-7058 Starting Device is a quality product made by Danfoss
Danfoss 117-7058 Starting Device is designed to reduce both installation time and costs
It has an replaceable set of contacts that are rated at 15
Danfoss 117-7058 Starting Device is a starting device that is used to start engines
This product has a rating of 12V/70A, 50% duty cycle @100°F (37°C)
It is a single acting, with centrifugal switch on open and close contactor, voltage 24 V AC, 57 VA, with thermal overloading protection
The application of this particular device is for engines with voltages between 36 and 72 volts and the current ranging from 1
5in and the weight is
The product works with Single Phase
The Danfoss 117-7058 Starting Device is an extensive and high quality range of electrical components, including starters, contactors, heaters, resistors, etc
1 amp, and a momentary current of 1 amp
The product also offers a Connector(s) Terminals as well as Failsafe Function
Danfoss 117-7058 Starting Device
It has a maximum voltage of 30VDC @ 1
The dimensions are 3in x 1in x 0
Danfoss 117-7058 Starting Device is a device that allows you to start a motor by pressing a button