Danfoss 068Z3403 "3/8""x1/2""TES2 R404A ExtExpVlv" "3/8""x1/2""TES2 R404A ExtExpVlv"

"3/8""x1/2""TES2 R404A ExtExpVlv"

The Danfoss 068Z3403 "3/8""x1/2""TES2 R404A ExtExpVlv" "3/8""x1/2""TES2 R404A ExtExpVlv" is a high performance compressors that provide reliable Refrigeration performance. With the capability to be installed in multiple applications, the Danfoss 068Z3403 "3/8""x1/2""TES2 R404A ExtExpVlv" "3/8""x1/2""TES2 R404A ExtExpVlv

The Danfoss 068Z3403 - "3/8""x1/2""TES2 R404A ExtExpVlv" is an absolute standard in replacement valves for commercial air conditioning systems. This product is perfect for use in compatible applications where it has the ability to deliver multiple pipe connections with minimal effort. It is a great addition to any commercial installation that utilizes HFC refrigerant (R-404A).

The 068Z3403 "3/8""x1/2""TES2 R404A ExtExpVlv" is used in Heat Pump Mode, much like a traditional split system delivers air conditioning. It can be used to deliver chilled water supply up to 50°F to the Air Handling Unit. An additional expansion valve or changeover coil could be added for heating via a heat pump operation (heat pump heat is less efficient in cooling compared to electric resistance heat). Due to the max operating pressure rating of this device, it is recommended that only flexible liquid lines and pre-charged accumulators be used in

3/8""x1/2""TES2 R404A ExtExpVlv

The Danfoss Z34 series valves are the "3/8""x1/2""TES2 R404A ExtExpVlv". This valve meets the latest international standard for R404A, which is Z34.3.

This Danfoss 3/8""x1/2""TES2 R404A Extension Valve is the right part for you, if the air conditioning or refrigerating system does not operate normally. It is suitable for use with the Danfoss developed systems, and it reduces the high air pressure to low pressure that is required by the refrigeration control. To ensure its proper functioning, always connect a cold water pipe to the right hand side of this valve.

TES2 Compressor and Evaporator Kits offer an integrated solution to the entire range of R404A applications. This offers you and your customer total protection through the entire refrigeration cycle. TES2 is available in horizontal or vertical mounting, as direct replacement for most 3/8""x1/5"" valves.  The TES2 valves allow low-critical-pressure operation with 17''minimum headroom; they are suitable for R409A and R507A applications, too."