Deltana CSA10U3 10" Casement Stay Adjuster, Bright Brass Finish
Deltana 10 inch casement stay adjuster allows a builder or a homeowner to move a window from side to side, up and down, open and closed, depending on their own personal needs. Deltana casement stay adjusters have the ability to move your windows out as much as 400 mm. The unit is constructed from solid brass with a bright polished brass finish.
CSA Series Casement Stay Adjuster, Bright Brass Finish
This Stay Adjuster or lock is designed to be used to secure casement operable windows manufactured in the 1960's through present day. The acrylic stops found on the two post stop assemblies were often broken when adjustment was required due to pinching when up against the ADJ3 stay when adjusted all the way up. This ADJ10U3 10" ADJUSTER is to be used when replacing a broken stay in an operating window in need of adjustment to bring it back towards its closed position. If you do not know what size to order, please refer to the popular manufacturer list below this product description.
Stay adjusts are commonly used for window and door applications. This casement stay adjuster will add a finishing touch to your window hardware in a bright brass finish. It works with a ball-bearing detent system in a dovetail channel.
The 10 inch stay adjuster is used to adjust the position of a casement window in an open position.
Stay adjusters keep wavy windows and doors aligned in the open position. Several casement stays operate in unison via a center-mounted screw and pivoting lever. The lever is normally grasped in the hand and adjustments made by means of a thumbscrew. For easy window and door adjustment; fits 3/16"-diameter (5mm) or 1/4"-diameter (6mm) casements; accepts 3/32" (2.5mm) jam cleat for double-acting stays; chrome finish lets you add a decorative accent to your home.
Stay Adjusters are used to hold the Vertical Stays of a casement window in an out position for proper maintenance of the window. They're designed with heavy duty zinc die-cast housing with integral 4 pin design. The two stays extend from the vertical mounting plate approximately 5 3/4" into the window opening. These stay adjusters may come with rounded or square ends, and different lengths of horizontal arms depending on your needs.