Deltana DSLP316U15 Low Profile Solid Brass Dome Stop (Set of 10) (Satin Nickel) 760923338009 .

Deltana DSLP316U15 Dome Stop Low Profile, Satin Nickel Finish

Dome Stops (DSLP316U15) are used for adjusting doors and windows. They help delay the closing action of doors and windows until the operator is out of the path of the door. Dome Stops do not keep a door or window open; they simply delay the closing action. Use several Deltana DSLP316U15 Dome Stops with any style door or window. When clockwise, the stop will return to its original position after adjustment. The low profile stop is ideal when space is tight between the edge of the door and frame.

Setting the bar even higher for our line of decorative hardware, Deltana has developed a Low Profile dome stop. The Deltana low profile has a height of 1.76"" and interlocks with Deltana spindles for a clean and finished look.

Dome Stops are used for where a door opens into a wall cavity and the door must clear an obstruction or change elevation. The Low Profile (Door Threshold) Solid Brass Dome stops are available in Satin Nickel or Black finishes, and in 3 profiles: Low Profile, Triple Step and Quad Step. Each stop comes with a 8mm x 20 socket cap screw and matching nylon insert lockwasher

A dome stop is a low-cost alternative to re-mortaring your repair project. This Satin Nickel finish dome stop offers an elegant way to hide the joint between two pieces of masonry. (Flanges not included.)

Satin Nickel Dome Stops for use with 1/2 inch diameter cylindrical knobs; mount at an angle of approximately 15-20 degrees to the cabinet door, or vertical. Required spacing is 1-3/4 inches. Includes 10 pieces.

Low Profile Solid Brass Dome Stops are a common solution to help secure doors and windows that extend out from the walls. These stops are used primarily on doors and windows where the gap between the door or window and the wall is wider than .5" (which is why "Low Profile" is in the product title, meaning they are lower than typical dome stops).

The Low Profile Solid Brass Dome Stop is used to keep the slider from sliding all the way around. Its low profile design does not interfere with the door or window frame as it rotates open and closed.