Deltana S44R55 4 in. x 4 in. x 0.63 in. Radius Residential Steel Hinge - Pair (Set of 10) (Antique Brass).

Deltana S44R55 4" x 4" x 5/8" Radius Hinge, Antique Brass Finish

Deltana S44R55 4" x 4" x 5/8" Radius Hinge, Antique Brass Finish

Designed to withstand the harshest environments, the Deltana S44R55 4-Inch x 4-Inch x 5/8-Inch Radius Residential Steel Hinge, Antique Brass Finish is great for indoor or outdoor applications. The finish helps to resist corrosion and tarnishing so the hinge will always remain beautiful. The pair of hinges can handle up to a 80 lb. load and come with the necessary mounting hardware.

Deltana S44R55 4" x 4" x 5/8" Radius Hinge in Antique Brass is an oil rubbed-bronze finish. These hinges are designed for use on wood doors to help keep the door tight against the frame and accommodate the natural movement of the door. This hinge features a 3/8" offset.

4" x 4" x 5/8" Radius Zinc-Plated Steel Hinge Now you can add that custom look to your cabinets and furniture with heavy duty S44R55 hinges. Deltana's radius soft close hinge is designed to bring out the beauty and style of decorative woodwork. With an offset design that maintains the original mounting spacing, this 5/8" radius hinge allows the door to swing open and then closes tightly against the cabinet or door frame. The soft close feature helps keep doors closed against unwanted air-flow. Fully adjustable for door thickness, you get a perfect fit every time.

The S44R55 has a fully articulating head, with radius corners on the shoulder to allow for tighter radius application. It measures 4" x 4" x 5/8" overall, and is installed using two screws for each hinge.  For proper installation, screws should be inserted into the side jamb at a 45 degree angle and then driven down until they are seated fully.

Deltana® Radius Hinges are ideal for use on closet doors, entertainment centers, and a variety of other residential applications. Because these hinges are designed to build out from the door/drawer side, they are ideal for use where flush mounting is required.

Antique Brass finish hinge. 4" x 4" base plate. 5/8" radius trim plate. 3 ½" center-to-center screw spacing. 1 ½" standard screws provided with hinges, designed to maintain 1/2" or thicker cabinet or door material. Screws and mounting instructions included in each box of hinges.