Deltana SDP25U10B 2.5 in. x 2.75 in. Solid Brass Passage Pocket Lock (Set of 10) (Oil Rubbed Bronze)

Deltana SDP25U10B Pocket Lock, 2 1/2" x 2 3/4" Passage, Oil Rubbed Bronze Finish

Deltana SDP25U10B Pocket Lock, 2 1/2" x 2 3/4" Passage, Oil Rubbed Bronze Finish. This product is a direct replacement for discontinued item 17692. Matching finish and measurements are also available in keyboard pulls and spring action concealed door closers. Look under "Related Products". If you need to match the inside measurements of the 2 1/2" x 2 3/4" passage then use Deltana 84185, we do not carry that line.

The Deltana SDP25U10B is a solid brass passage pocket lock that features a 2 1/2" x 2 3/4" passage size and an oil rubbed bronze finish. This lock is easy to install and provides a secure way to restrict access in hallways, kitchens, and other doorways. It can also be installed vertically or horizontally.

Deltana SDP25U10B - Passage Pocket Locks. Solid Brass Construction With A Snap-On Installation And An Oil Rubbed Bronze Finish. Includes A Matching 2 1/2" x 2 3/4" Passage With A Viewer But No Strike Dimensions: 2 1/2" x 2 3/4"

The Deltana SDP25U10B 2 1/2" x 2 3/4" Solid Brass Passage Pocket Lock (Oil Rubbed Bronze) is a lock that can be used on bedroom doors or other areas of the home. It has an oil rubbed bronze finish, and it features an adjustable latch so that it is easy to install on any door.

The Deltana SDP25U10B 2.5 in. x 2.75 in. Solid Brass Passage Pocket Lock (Set of 10) adds protection and security to your exterior doors, and it's built to last thanks to its solid brass body construction. Each lock cylinder features a rotating collar for applications where the doorknob is not centered on the door, and a removable single-sided latch bolt prevents intruders from using a pry bar or other device to gain access into your home or business. Works with all standard doors.

The SDP25U10B Passage Pocket Lock features an oil rubbed bronze finish and has a center to center hole on 1-3/4" stile. Note: This lock requires a hole of at least 7/8" in perimeter and 7/8" in diameter surrounding the door latch faceplate to install. It should not be installed on doors with surface that easily deform as it may cause injury. Also, doors with less than 1 3/4" stile will not be strong enough to support this product.

The SDP25U10B is an Oil Rubbed Bronze finish passage level 1 deadbolt with a 25 mm throw. It comes complete with a 3/8" square drive active cylinder keyway and cut-in faceplates.