Deltana WB250-32D ENTERPRISES INC 2-1/2 CONCAVE FLUSH BUMPER STEEL U32D

2-1/2 CONCAVE FLUSH BUMPER STEEL U32D

DELTANA ENTERPRISES INC WB250-32D 2-1/2 CONCAVE FLUSH BUMPER STEEL U32D

DELTANA ENTERPRISES INC WB250-32D 2-1/2 CONCAVE FLUSH BUMPER STEEL U32D. Designed for applications where clearance around mounting hole is limited. This high quality bumper is designed to provide more surface area, adding strength and improving impact resistance. The steel U32D contains the unique gussets on the top and bottom edges which adds style and function. The steel washer gives optimum performance yet weighs less than some competitors' plastic armors. Hole diameters are available from 0"-0".

The Deltana WB250-32D 2-1/2 Concave Flush Bumper Steel U32D, 50" H x 24" W, 24.3 Lbs . This bumper has a Type-B Full Flow Opening, Heavy Duty Welded Construction, 32 Density High Density Polyurethane Foam Inner Cushion with Vented Air Pilots (15% Closed Cell Foam)

The Deltana WB250-32D is a 2-1/2? concave flush bumper made of 20 guage cold rolled steel material. It has a diameter to fit into 1-3/8? thick or 1-3/4? thick wood or metal panel applications. The WB250-32d is available in pre-finished steel, raw steel and primed steel.

The WB250-32D 2-1/2" Convex Flush Bumper is 32" Long from outside top flange to outside top flange.

The WB250-32D is a 2-1/2 inch x 32-foot continuous welded round steel bumper.? The WB250-32D has a rust resistant, zinc primer and epoxy coated, with white reflective striping.

Made with a high-strength alloy steel bar with a zinc-chromate finish welded between two steel plates, using an automated robot. The 2-1/2'' x .120'' flat bar with a bend radius of 32'' provides a continuous surface that is fully welded with no weak points or hollow spots. Its flat bar construction makes it ideal for uses requiring high strength and rigidity such as commercial loading docks, parking garages, commercial ramps, water towers, bridge approaches and mining sites.