DIGI INTERNATIONAL 70001851 DIGI ONE SP 1 PORT RS-232/422/485 DB-9 SERIAL TO ETHERNET DEVICE SERVER INCLUDES

DIGI ONE SP 1 PORT RS-232/422/485 DB-9 SERIAL TO ETHERNET DEVICE SERVER INCLUDES

DIGI ONE SP 1 PORT RS-232/422/485 DB-9 SERIAL TO ETHERNET DEVICE SERVER INCLUDES PLUG AND PLAY USB CONNECTION.

The DIGI ONE SP 1 Port RS-232/422/485 DB-9 Serial to Ethernet Device Server includes internal configuration settings for easy setup. Serial port status LEDs provide a quick visual indication of connection and network link status.

The Digi One SP 1 port serial to Ethernet device server with software selectable RS-232/422/485 and DB9 connector is a compact board-level solution. Most noteworthy is the combination of the NCR81020 Ethernet Hub chip that supports 10BASE2/10BASE5/10BASE-T and 100BASE-TX utilizing 3C509A chipset. Connects terminals, notebooks, personal computers or any RS232/422/485 equipped non-Ethernet serial devices to an Ethernet network. The board has a solid design built around an Intel Single Chip set.

Expand RS-232 and 422/485 serial devices to an Ethernet network with the DIGI ONE SP 1 Port Ethernet Device Server. This product includes a 1 port digi Serial to Ethernet gateway and is easy to install and configure. This device server is ideal for SCADA industrial automation, HMI, laboratory instrumentation, PLCs and more.

The DIGI ONE SP 1 Port RS232/422/485 Serial to Ethernet Converter, is designed for converting RS-232 and RS-485 (Bi-Directional) serial data to Ethernet data suitable for thin client connection (or other IP devices). The converter also supports host power consumption measurement and remote configuration. It is powered through an external power supply or from an external DC 5 V source.

For anyone needing more ports and capabilities for their serial device, you can now add the DIGI One SP1 to your system. The DIGI Serial to Ethernet Device Server is a compact device server that supports RS-232, RS-422, and RS-485 serial data communications protocols. A simple process of 1-2-3, simply plug in the appropriate cable, configure the Baud rate of your RS-232 device and then power up the RS-232 serial device into the console port on the unit. The DIGI Serial to Ethernet Device Server will recognize the baud rate of the serial device

The DIGI ONE SP 1-PORT SERVER, RS-232/422/485 TO ENET, INCLUDES THE INTERCEPTOR II PE TELEMETRY SYSTEM AND THIS SERVER DRIVERS AS SOFTWARE. IT HAS AN ON BOARD RJ-45 PORT FOR ETHERNET INTERCONNECTION TO THE REMOTE SENSORS USING AN ETHERNET CABLE. IT IS BUILT IN ENCRYPTION CAPABILITY WHICH ALLOWS SECURE COMMUNICATION BETWEEN THE SERVER AND THE REMOTE SENSORS WITH A SEPARATE KEY SET FOR E