Johnson Controls P72LB-1C Penn Series P72 Standard Electromechanical Pressure Control, DPST Switch, 20" Hg-100 psi, 7-50 Differential psi, Fixed, Low Cut-Out

DPST DUAL PRESSURE; 36 CAP;

The Johnson Controls Penn Series P72 Standard Electromechanical Pressure Control with DPST Switch features a Type 1 Diaphragm and 36-Cap. It includes a For Use With air compressor, lubricating oil pump, power tools etc. This type of pressure control operates under both low and normal line pressures.

The Johnson Controls P72LB-1C Standard Electromechanical Pressure Control with DPST switch is designed for medium differential applications; ideal for regulating pressures in above-ground oil storage tanks, pit and storage tanks, water supply, irrigation systems and feed lines. The pressure can be set to full open at 7 psi (0 bar) or full closed at 50 psi (3 bar) with a maximum operating differential of 100 psi (7 bar). The low cut-out switch allows a safety venting at a preset differential pressure of 3 psi (0.2 bar).

The P72LB is a dual pressure, isolation valve. The 6" long screw-in bonnet is supported with a 2" long shoulder above the body. This allows for adjustment to set the differential pressure. For gasses, this would be the regulator outlet to, or from, the process LO.

The P72LB-1C is a dual pressure, DIN rated standard pneumatic pressure control. The standard 2" body and 1" port allow for two switches and two detectors to be mounted within the same panel. Positive pressure and differential pressure are maintained by a twin diaphragm capsule assembly.

With a pressure control that is built for your comfort, the P72LB-1C is a great addition for any flooring. Featuring a Dual Pressure Circuit ensuring you have more options when it comes to controlling the air in your building, the P72LB-1C will meet standard in your home and in your office.

Johnson Controls' newest generation of Penn Standard electromechanical pressure relief valves offers the highest level of automation and control available.

The B-Series 7 model is a standard direct-reading mechanical pressure control with a manually operated spade handle and a preset differential setting. The B-Series 9 model has an automatically controlled motorized spade handle. The B-Series 36 model has spherical valve that is preset for a differential of 25 psi from the high side to the low side. The port size on all three models is 2".

Designed to meet the growing demand for reduced pressure differential switch performance, the JCI P72 Series includes micro-processor technology to eliminate all magnetic components from the switching mechanism. These standard and low differential switches avoid damage to operating equipment and reduce or eliminate costly downtime.

This Johnson Controls (P72) Electromechanical Pressure Control is part of the Penn series with a low differential of 7-50 psid and a cut-out range of 20" Hg.

The P72LB-1C is a Standard Pressure Control designed for use on gravity condensing unit heat pumps where a fixed differential pressures, fixed switch position and low cut-out are required. The P72LB-1C is a single control with a fixed differential pressure of 36 psi, a fixed switch position and a low cut-out of 20 psi. This product can be used to limit condensate pump operation to a preset differential pressure when the compressor head requires additional cooling beyond the scavenging ability of the indoor coil.

The Penn II Controller family includes devices for low, constant or dual operation. Capacities range from 1 to 72 amps. "AA" type batteries can power the controller if line power is lost. The digital display provides a readout of supply pressure and differential pressure. This series is ideal for commercial applications but economical enough for residential use.

The P72 Series regulator includes a built-in gauge and various mounting options to fit any installation need. Its rugged, plastic housing can withstand the extreme conditions found in industrial applications. The P72LB is autoranging and has a compact design for easy integration into control panels and on control valves.