HONEYWELL EA79A1004 EA79A1004 3/4"(M) X 1/2"NPT(F) INDUSTRIAL AIR

3/4"(M) X 1/2"NPT(F) INDUSTRIAL AIR

Pre-assembled, factory wired and ready to be plugged in HONEYWELL EA79A1004 EA79A1004 3/4"(M) X 1/2"NPT(F) INDUSTRIAL AIR

The EA79A1004 is a 3/4"(M) X 1/2"NPT(F) Indrerial Air Valve with brass body. It is commonly used in HVAC or mechanical systems for air flow control.

This 1/2"NPT Industrial Air Cap consists of a heavy-duty polypropylene body and non-wearing thermoplastic rubber sealing and cap.

Honeywell's EA79A1004 is a 1/4" National Pipe Thread (NPT) reducing tee with 3/4" male NPT and 1/2" female NPT that provides right angle air connection. {{{{STOCK_FOLDER}}}}}

This Industrial Air Regulator is designed to handle both Subsonic and Supersonic flows. It has been pressure tested up to 5500 psi at maximum operating temperature of 250 deg. F. for 90 minutes and passes a leak test at maximum operating pressure of 5000 psi.

The Honeywell EA7900 Industrial Air Regulator is used to control air pressure of oil-free compressed air, dry or wet, in a number of industrial applications. The EA7900 Industrial Air Regulator features an extra port that can be used to bleed air from a cylinder or system. The incorporate design of the EA7900 Industrial Air Regulator makes it easy to install, adjust and maintain. This Heavy Duty regulator is a pneumatic component which provides controlled pressure and flow rates on all types of compressed-air systems. These regulators will be able to manage varying pressure systems with a range of 0-15 ps

Accurately measure discharge and suction pressures of compressors, pumps and blowers for industrial HVAC applications. Industrial Air systems with TRU- balanced diaphragm are designed for use in industrial instrumentation or other high pressure process applications where reliable performance and repeatability are important.