ENGLANDER PU-VS VAC SHUT DOWN SWITCH

VAC SHUT DOWN SWITCH

The Vac Shut Down Switch cuts off electric current to roller-type vacuum pumps in the event of a hose connection break and/or pump overload. The unit shuts down pump operation instantly, protecting the driver and apparatus from danger and increasing equipment life. The Vac Shut Down Switch is equipped with a standard 10 Amp single pole breaker.

Englander's PU-VS vacuum switch is a replacement for the original vacuum switch assembled in 1948. This vac shut down switch is a two terminal wire sealed unit which provides a low power drain to indicate whether or not the vacuum pump is on. This part has been completely tested and guaranteed to function properly. It is recommended that this switch be changed once every four years in order to prevent any malfunction of the pump being caused by a worn switch.

Keep your system clean, and save time and money with this Vac Shut Down Switch by Englander. This electrical component allows the user to turn off a vacuum system quickly. When used with suction-assisted air control components, you can stop an air system in less than 1/2 second.

If you have a wet/dry vacuum, or any other tool that runs off of a vacuum source, this shut down switch is designed to save your electrical components from burning out. It is built out of high quality, high heat rated brass and it fits standard 1/4" vacuum ports.

The ENGLANDER Vac Switch is a quick connect, quick release pivot disconnect actuated vacuum switch for use with ENGLANDER brand vacuum systems. It offers an innovative solution for quick changing of vacuum hoses. This switch will shut down the vacuum system to its low flow drain upon release when it detects that the hose is disconnected. Designed for use with the ENGLANDER E20, D20, and P20 vacuum systems.

Built to maintain overload and over-temperature protection, our PU-VS Vacuum Shutdown Switch is an affordable, durable and reliable option. A complete vacuum interrupter system that includes the switch, mounting base and gasket, it is NEMA 1 rated and draws only 7.0 mA from 12 VDC systems.

Shut off the vacuum pump with this ENGLANDER Vacuum Switch, PU-VS. This switch is made with quality parts, ensuring that it will last a long time.

ENGLANDER PU-VS & PU-VSD Vacuum Switches use less energy than other vacuum switches on the market and are effective at a lower inlet pressure. ENGLANDER's vacuum switches are available with a variety of mounting options: metal lever, located on top of switch; pin, located on ball and notched lever, located on bottom of switch, and our new 2 hole PUSH NO PULL versions which allow you to simply push down or pull up the metal lever with your finger to shut the pump off.

The Plug-In Vacuum Switch automatically turns off your central vacuum unit when the unit is unplugged to prevent dust and other particulate materials from getting back into your home's air supply. Features a 10/3-gauge SJTW electrical cord that is 14' long. This switch works with most brands of central vacuums and comes in an easy-to-install package that includes hardware, instructions, and batteries.

With the ENGLANDER PU-VS vacuum switch, the vacuum motor can be shut down during operation. The ENGLANDER PU-VS vacuum suction switch is well suited for linear actuators. The ENGLANDER PU-VS vacuum suction switch is designed for short circuit mode. The ENGLANDER PU-VS vacuum suction switch has been tested for ground voltage safety and leakage current with high impedance in accordance with DIN VDE 0705.

Englander's PU-VS switch meets OSHA and UL requirements for safe vacuum system operation. It has a long life 3/4" bushing and is rated for 15 amps, 600V. The switch is available in single or three phase mounting options with a 1/3 hp polyswitch arc suppression device. Englander has been a leader in the electrical industry since it's founding in 1914.